Home/Brands/Titleist irons/DCI (1996–2000)
Original iron specifications

Titleist DCI Oversize + Black irons (1996–2000)

Titleist DCI Oversize + Black (1996–2000), with a 34.5° 7-iron and 47° pitching wedge in Titleist’s published table.

7-iron loft
34.5°
Pitching wedge loft
47°
7-iron length
36.75 in
Compare this iron generation →
Titleist DCI Oversize + Black irons, 1996–2000 generation
Model image · Titleist DCI Oversize + Black irons (1996–2000). View image source ↗

Loft, lie & length chart

Titleist’s published specification table on its Previous Models page, lengths in inches.

Titleist DCI Oversize + Black irons (1996–2000) · angles in degrees, length in inches
ClubLoft (°)Lie (°)Length (in)
1175839.5
2195939.25
3226038.75
4256138.25
5286237.75
63162.537.25
734.56336.75
83963.536.25
9436435.75
PW476435.5
GW516435.5
SW566435.25
LW606435.25

Source: Titleist DCI Oversize + Black Previous Models page (listed 1996–2000). Checked 2026-10-22.

How to identify this generation

  • A 5-iron with a black DCI triangle badge at the toe end of a deep cavity, a Titleist script across the cavity and an OVERSIZE + bar along its lower edge.
  • The DCI name also appears on these Titleist irons; compare their markings before using this chart: DCI Oversize + Gold (1996–1998); DCI 962 (1997–1999); DCI 962B (1997–2000); DCI 981, DCI 981SL (1998–2001); DCI 990 (1999–2000); DCI 990B (2000–2002); DCI 762, DCI 822OS (2001–2003); DCI 762B (2002–2003).

What to notice in the specifications

  • Titleist’s table runs from the 1-iron to a 60° LW (13 clubs) with D2 swing weights through the PW and offsets from .240 in at the 1-iron to +.010 in at the wedges.
  • Its bounce row prints only four values (6°, 12°, 19°, 21°), so bounce is not recorded here.
  • The DCI Oversize + Gold page prints larger offsets (.386 in at the 1-iron) with the same lofts, lies and lengths; the badge colour tells the two apart.
  • Titleist publishes the same lofts, lies and lengths for DCI Oversize + Gold (1996–1998), a different head.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.

Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.