Cobra King Cobra SS Forged irons (2004 US page)
Cobra King Cobra SS Forged, with a 35° 7-iron and 47° pitching wedge.
Loft, lie & length chart
Cobra’s published men’s steel-shaft specifications from the 2004 iron specification page. Seniors’, women’s and graphite builds differ.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 18 | 60 | 39.5 |
| 3 | 21 | 60.5 | 39 |
| 4 | 24 | 61 | 38.5 |
| 5 | 27 | 61.5 | 38 |
| 6 | 31 | 62 | 37.5 |
| 7 | 35 | 62.5 | 37 |
| 8 | 39 | 63 | 36.5 |
| 9 | 43 | 63.5 | 36 |
| PW | 47 | 64 | 35.75 |
| 50° | 50 | 64 | 35.5 |
| 55° | 55 | 64 | 35.25 |
| 60° | 60 | 64 | 35.25 |
Source: Cobra Golf iron specifications, Internet Archive capture dated 2004-02-21. Checked 2026-10-08.
How to identify this generation
- King Cobra lettering with FORGED SS sits in the lower cavity, with a cobra-head badge in a round recess near the top of the cavity.
What to notice in the specifications
- Cobra’s 2004 table lists the SS Forged in steel only. The P club is shown as PW and the 50°, 55° and 60° wedges keep Cobra’s loft labels.
- The chart comes from an Internet Archive capture of Cobra’s US iron specification page dated 2004-02-21.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Cobra
KING TEC irons (2025)
The 2025 KING TEC chart lists a 29.5° 7-iron and 44° pitching wedge.
KING TEC X irons (2025)
KING TEC X uses a 27° 7-iron and a different lie sequence from KING TEC.
3DP MB irons (2026 US page)
3DP MB from Cobra’s current US product page, with a 34° 7-iron and 46° pitching wedge.
3DP Tour irons (2026 US page)
3DP Tour from Cobra’s current US product page, with a 31° 7-iron and 45° pitching wedge.