Original iron specifications
Cobra 3DP Tour irons (2026 US page)
3DP Tour from Cobra’s current US product page, with a 31° 7-iron and 45° pitching wedge.
7-iron loft31°
Pitching wedge loft45°
7-iron length37.25 in
Loft, lie & length chart
Standard lengths from Cobra’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 19 | 60 | 39.25 |
| 4 | 21.5 | 60.5 | 38.75 |
| 5 | 24 | 61 | 38.25 |
| 6 | 27 | 61.5 | 37.75 |
| 7 | 31 | 62 | 37.25 |
| 8 | 35 | 62.5 | 36.75 |
| 9 | 40 | 63 | 36.25 |
| PW | 45 | 63.5 | 36 |
| GW | 50 | 63.5 | 35.75 |
Source: Cobra 3DP Tour irons US product page. Checked 2026-10-08.
How to identify this generation
- A crown-topped C logo sits above a textured band lettered 3DP TOUR toward the toe; the head is fuller than the 3DP MB.
What to notice in the specifications
- Cobra marks left-hand availability with an asterisk; its footnote says select head, shaft and flex offerings are custom only.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Cobra
CobraGeneration 2026 US page
3DP MB irons (2026 US page)
3DP MB from Cobra’s current US product page, with a 34° 7-iron and 46° pitching wedge.
34° 7-iron loft
CobraGeneration 2026 US page
3DP X irons (2026 US page)
3DP X from Cobra’s current US product page, with a 29° 7-iron and 43° pitching wedge.
29° 7-iron loft
Cobra2025
KING TEC irons (2025)
The 2025 KING TEC chart lists a 29.5° 7-iron and 44° pitching wedge.
29.5° 7-iron loft
Cobra2025
KING TEC X irons (2025)
KING TEC X uses a 27° 7-iron and a different lie sequence from KING TEC.
27° 7-iron loft