Original iron specifications
Cobra 3DP X irons (2026 US page)
3DP X from Cobra’s current US product page, with a 29° 7-iron and 43° pitching wedge.
7-iron loft29°
Pitching wedge loft43°
7-iron length37.25 in
Loft, lie & length chart
Standard lengths from Cobra’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 20 | 62 | 38.75 |
| 5 | 23 | 62.5 | 38.25 |
| 6 | 26 | 63 | 37.75 |
| 7 | 29 | 63.5 | 37.25 |
| 8 | 33 | 64 | 36.75 |
| 9 | 38 | 64.5 | 36.25 |
| PW | 43 | 65 | 36 |
| GW | 48 | 65 | 35.75 |
Source: Cobra 3DP X irons US product page. Checked 2026-10-08.
How to identify this generation
- A larger head with a crown-topped C logo above a wide textured band, with 3DP X lettering low near the toe.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Cobra
CobraGeneration 2026 US page
3DP MB irons (2026 US page)
3DP MB from Cobra’s current US product page, with a 34° 7-iron and 46° pitching wedge.
34° 7-iron loft
CobraGeneration 2026 US page
3DP Tour irons (2026 US page)
3DP Tour from Cobra’s current US product page, with a 31° 7-iron and 45° pitching wedge.
31° 7-iron loft
Cobra2025
KING TEC irons (2025)
The 2025 KING TEC chart lists a 29.5° 7-iron and 44° pitching wedge.
29.5° 7-iron loft
Cobra2025
KING TEC X irons (2025)
KING TEC X uses a 27° 7-iron and a different lie sequence from KING TEC.
27° 7-iron loft