Original iron specifications
Cobra KING TEC irons (2025)
The 2025 KING TEC chart lists a 29.5° 7-iron and 44° pitching wedge.
Cobra KING TECIdentify the head using the linked manufacturer source.View source and product imagery ↗
Loft, lie & length chart
Cobra's 2025 KING TEC standard steel specification table; stock set is 4–PW.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 19 | 60.5 | 39.25 |
| 4 | 21 | 61 | 38.75 |
| 5 | 23 | 61.5 | 38.25 |
| 6 | 26 | 62 | 37.75 |
| 7 | 29.5 | 62.5 | 37.25 |
| 8 | 34 | 63 | 36.75 |
| 9 | 39 | 63.5 | 36.25 |
| PW | 44 | 64 | 36 |
| GW | 49 | 64 | 35.75 |
Source: Cobra 2025 KING TEC iron specifications. Checked 2026-09-28. Values are recorded at the precision supplied by the source.
Checking a used set? These are published factory specifications, not measurements of the clubs you own. Loft, lie and length may have changed through custom ordering or later work.
How to identify this generation
- Match KING TEC branding; KING TEC X is a separate model with a different loft row.
- Cobra's stock steel set is listed as 4–PW although the full specification table includes 3 and GW.
What to notice in the specifications
- The 7-iron is 2.5° weaker than KING TEC X in Cobra's tables.
- The 3-iron is RH only; left-hand entries from 4 through GW are marked custom only.
- A listed club does not establish the composition of a particular used set.
What the chart cannot tell you
A loft figure alone does not predict carry distance or determine a suitable fit. Head design, shaft, strike, swing speed and delivery also matter. Check actual loft and lie with a qualified fitter when a used set's history is uncertain.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.