Original iron specifications
Cobra KING TEC X irons (2025)
KING TEC X uses a 27° 7-iron and a different lie sequence from KING TEC.
Cobra KING TEC XIdentify the head using the linked manufacturer source.View source and product imagery ↗
Loft, lie & length chart
Cobra's 2025 KING TEC X standard steel specification table; stock set is 5–GW.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 19 | 62 | 38.75 |
| 5 | 21 | 62.5 | 38.25 |
| 6 | 24 | 63 | 37.75 |
| 7 | 27 | 63.5 | 37.25 |
| 8 | 31.5 | 64 | 36.75 |
| 9 | 36.5 | 64.5 | 36.25 |
| PW | 42 | 65 | 36 |
| GW | 48 | 65 | 35.75 |
Source: Cobra 2025 KING TEC X iron specifications. Checked 2026-09-28. Values are recorded at the precision supplied by the source.
Checking a used set? These are published factory specifications, not measurements of the clubs you own. Loft, lie and length may have changed through custom ordering or later work.
How to identify this generation
- Check for the X in KING TEC X; plain KING TEC has a separate head and chart.
- The official stock steel set is listed as 5–GW, while the table also includes a 4-iron.
What to notice in the specifications
- The 7-iron has 27° loft and 63.5° lie versus KING TEC's 29.5° and 62.5°.
- KING TEC X pitching wedge is 42°, two degrees stronger than KING TEC's 44°.
- Left-hand entries are marked custom only across the table.
What the chart cannot tell you
A loft figure alone does not predict carry distance or determine a suitable fit. Head design, shaft, strike, swing speed and delivery also matter. Check actual loft and lie with a qualified fitter when a used set's history is uncertain.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.