Home/Guides/Club types
Club types

Types of Golf Clubs: Names, Uses, Lofts and Lengths

The five types of golf clubs, from driver to putter: what each is called and used for, what its marking means, and its typical factory loft and length.

There are five types of golf clubs: woods, hybrids, irons, wedges and the putter. The woods are the driver and the fairway woods. Irons are numbered, wedges are the most lofted irons and usually go by a letter or their loft, and the putter is for the green. Under the Rules of Golf you can carry up to 14 clubs in a round, in any mix of these types.

What separates the types is mostly loft, length and head shape. In the 1,292 factory specifications in our catalog, the middle half of driver loft options is 9°–10.5°, and the typical driver is built at 45–45.75 in. The typical putter has 3° of loft and is 34–35 in long. They are manufacturers' published specifications, not measurements of real clubs, and they do not tell you how far you will hit any club.

Golf club types at a glance

Golf club types: typical factory loft and length (middle half of published specifications)
Club typeNames and markingsTypical loftTypical lengthMain jobIn our catalog
DriverDriver; older heads may be stamped 1 (1-wood)9°–10.5°45–45.75 inTee shots on long holes244 models
Fairway woods3-wood, 5-wood, 7-wood (also 4, 9, 11)15°–21°42–43 inLong shots from the fairway or tee180 models
HybridsNumbered like the iron they replace (3H, 4H) or by loft19°–25°39–40.5 inLong shots that launch more easily than long irons137 models
Irons3- to 9-iron; long (3–5), middle (6–7) and short (8–9)4–5: 21.5°–24°; 6–7: 27°–31°; 8–9: 35°–39°7-iron 37–37.25 inApproach shots into the green432 sets and references
WedgesPW, GW (also AW or UW), SW, LW, or the loft itself (52, 56, 60)PW 43°–46°, GW 48°–50°, SW 56°PW 35.5–35.75 in; specialty 35–35.5 inShort approaches, chips, pitches and bunker shots60 specialty wedge lines
PutterPutter; blade and mallet head shapes3°34–35 inRolling the ball on the green216 models

"Typical" means the middle half of the published values: a quarter of them sit below the range and a quarter above it. Iron and set-wedge lofts come from the 66 iron sets on sale in 2025–26, the same basis as our printable golf club guide. Woods, hybrids and specialty wedges use every loft option their makers list, and lengths use every published stock length, older models included. An older club can sit well outside these ranges. Irons in particular have gained stronger lofts over the years, as the golf club loft chart shows.

Woods: the driver and fairway woods

Woods have the largest heads and the longest shafts. The name comes from the wooden heads they once had; today's heads are metal.

The driver is the club most golfers use off the tee on long holes. It has the biggest head in the bag: 146 of the 197 drivers in our catalog with a published head volume list 460 cc. Driver heads are labeled by loft rather than number, and 9°–10.5° covers the middle half of the options. Many current drivers have an adjustable hosel, so the loft printed on the head is the standard setting, not necessarily how the club is set now. Browse every driver in the catalog by brand and year.

Fairway woods carry a number: 3-wood, 5-wood and 7-wood are the common ones, and some lines add a 4-, 9- or 11-wood. The higher the number, the more loft and the shorter the shaft. Across the 180 fairway wood models we list, the middle half of the loft options is 15°–21° and of the published lengths 42–43 in. Golfers use them for long shots from the fairway and as a tee club on holes where the driver is too much. Woods with the same number can still differ: the strongest head in each fairway wood line ranges from 12° to 19° across the 178 lines with published lofts, so check the fairway wood records for the model you own.

Hybrids: between woods and irons

A hybrid has a compact head that sits between a fairway wood and an iron in shape. Hybrids are usually numbered after the iron they were designed to replace, so a 4-hybrid (4H) takes the place of a 4-iron in that maker's lineup. Some carry only their loft. The middle half of the hybrid loft options in our catalog is 19°–25°, with published lengths of 39–40.5 in.

Many golfers swap their longest irons for hybrids, which are designed to get the ball airborne more easily than a long iron of similar loft. How much that helps varies from player to player, and the number on a hybrid does not tell you which of your irons it overlaps. Compare the actual lofts with the loft gap checker or the hybrid records.

Irons: numbered from long to short

Irons are numbered from long to short: long irons (up to the 5-iron), middle irons (6 and 7) and short irons (8 and 9). Each higher number adds loft and loses a little length. In our 339 iron-set charts, the median loft climbs 2° to 5° from one iron to the next, and each club is typically 0.5 in shorter than the one before. The typical 7-iron is built at 37–37.25 in.

Sets are commonly sold as 4-iron to pitching wedge (4–PW) or 5-iron to gap wedge (5–GW). Our guide to what an iron set includes explains those labels. Makers also sort irons into categories such as blades (muscle backs), cavity backs, players distance and game improvement. Those names describe head design and the golfer a model is aimed at. No standard defines them, so compare the specifications. The iron loft finder lists the published loft of every iron in the catalog by club number.

Wedges: pitching, gap, sand and lob

Wedges are the highest-lofted irons, built for short approach shots, chips, pitches and bunker play. Most iron sets end with a pitching wedge (PW), 43°–46° in the middle half of current sets. A gap wedge (GW, also called an approach wedge, AW, or utility wedge, UW) fills the space to the sand wedge (SW). A lob wedge (LW) is the most lofted club most golfers carry.

You can buy the gap and sand wedge to match your irons or as separate specialty wedges, which are sold by loft and bounce. The middle half of the loft options across the 60 specialty wedge lines in our catalog is 52°–58°. Our wedge loft guide has the full pitching, gap, sand and lob wedge loft chart by era, and the wedge gap planner spaces wedges from the pitching wedge you own.

Putters: blade and mallet

The putter rolls the ball along the green, and it is the only club in the bag designed to keep the ball on the ground. Putters have very little loft: 116 of the 153 putters in our catalog with a published loft list exactly 3°. The most common length options are 35 in (listed for 132 putters), 34 in (111) and 33 in (54).

Putter heads come in two broad shapes. A blade is a narrow, traditional head; a mallet is larger and deeper from face to back. The neck or hosel changes the toe hang, which describes how the head balances when the shaft is held level; many of our putter records list it.

Golf club numbers and letters

The marking on a club head tells you its type and place in the set. It does not tell you its exact loft, because every maker sets its own.

Common golf club markings and what they usually mean
Marking on the headClubWhat to check
A loft such as 9° or 10.5° (older heads: 1)DriverOn an adjustable driver the printed loft is the standard setting, not necessarily the current one.
3, 5, 7 (also 4, 9, 11) on a wood headFairway woodEach maker sets its own lofts; look up the model.
3H, 4H, 5H, or a loft such as 22°HybridThe number points to the iron it was meant to replace in that maker's line.
3 to 9 on an iron3-iron to 9-ironThe same number carries different lofts in different sets.
P or PW (some PING sets: W)Pitching wedgeUsually the last club of an iron set.
A, AW, G, GW, U, UW (Titleist sets: W)Gap or approach wedgeBrands use different letters for the same slot, and recent Callaway sets list AW and GW as two clubs; see golf club letters by brand.
S or SWSand wedgeA set-matched sand wedge, or a specialty wedge marked with its loft.
L or LWLob wedgeOften a specialty wedge of 58° or more.
52, 56, 60 and similarSpecialty wedge, marked by loftMany wedges add the bounce. Titleist's Vokey SM10 table writes a 50° head with 8° of bounce as 50.08.

How many clubs can you carry?

The Rules of Golf set a limit of 14 clubs. Under Rule 4.1b you must not start a round with more than 14 or have more than 14 during the round. If you start with fewer, you may add clubs up to 14, and nothing stops you from playing with fewer.

There is no required mix. One common way to reach 14 is a driver, a 3-wood, a 5-wood, a 4-hybrid, the 5-iron through 9-iron, a pitching wedge, a gap wedge, a sand wedge, a lob wedge and a putter. Another golfer might drop the lob wedge for a second hybrid. The bag gap analyzer checks the lofts of the clubs you carry for gaps and overlaps.

Old golf club names

Before numbered sets became standard, clubs had names. The brassie and spoon were fairway woods, and the cleek, mashie, mashie-niblick and niblick were irons. Old and modern clubs are hard to compare, so treat any conversion as approximate. The most common pairings are the brassie with a 2-wood, the spoon with a 3-wood, the mashie with a 5-iron, the mashie-niblick with a 7-iron and the niblick with a 9-iron.

Identify the clubs you own

If you have a club and want to know its type, generation and original specifications, start with the what year is my club finder or search the club directory. Our guide to identifying older golf irons covers the markings worth photographing, and a used-iron checklist covers what to check before you buy.

Sources and limits

The lofts, lengths, head volumes and counts on this page are computed from the 1,292 manufacturer specifications in our catalog each time the site is built, last reviewed November 16, 2026. Each record links its source on its own page. The 14-club limit is Rule 4.1b of the Rules of Golf, published jointly by The R&A and the USGA (checked November 16, 2026). The old club names follow the "most generally accepted" equivalents in Golf Today's names of old golf clubs and their closest modern equivalents (checked November 16, 2026), which itself calls an exact comparison almost impossible. This page does not give carry distances or fitting advice: loft and length alone do not tell you how far a club goes for you, and a used club may have been bent, cut or reshafted since it left the factory.