Titleist CB irons (718)
The 718 CB chart includes 2–PW and a 35° 7-iron; its shared 718 table must be read from the CB loft row.
Loft, lie & length chart
Manufacturer’s standard length row, in inches. Custom orders and later reshafting can differ; the archive does not provide a separate graphite length table.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 18 | 59.5 | 39.5 |
| 3 | 21 | 60 | 39 |
| 4 | 24 | 61 | 38.5 |
| 5 | 27 | 62 | 38 |
| 6 | 31 | 62.5 | 37.5 |
| 7 | 35 | 63 | 37 |
| 8 | 39 | 63.5 | 36.5 |
| 9 | 43 | 64 | 36 |
| PW | 47 | 64 | 35.75 |
Source: Titleist 718 CB archived specifications. Checked 2026-10-04.
How to identify this generation
- Look for the CB cavity marking and 718 hosel code, then compare the head with the 718 CB archive photo.
What to notice in the specifications
- The shared source table includes AP1, AP3, AP2, T-MB, CB and MB. Only the CB loft row is used here.
- The shared 718 lie row specifies 59.5° for the 2-iron. Preserve that figure rather than copying the 59° value from 716 CB.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Titleist
CB irons (716)
The 716 CB cavity-back chart starts with an 18° 2-iron and ends with a 47° pitching wedge.
AP1 irons (710)
The 710 generation of the AP1 family. The generation code is part of the identity, rather than a confirmed manufacture date.
AP2 irons (712)
The 712 generation of AP2, with a 35° 7-iron and a 47° pitching wedge in the standard table.
AP2 irons (710)
The AP2 710 table lists a 35° 7-iron and 47° P wedge.