TaylorMade RocketBladez Tour irons (2013 catalog)
RocketBladez Tour has a published 33.75° 7-iron and 47° pitching wedge in this factory chart.
Loft, lie & length chart
The single length row from the 2013 RocketBladez Tour page; no separate stock graphite length table is supplied.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 19 | 60.5 | 38.75 |
| 4 | 22 | 61 | 38.25 |
| 5 | 25.25 | 61.5 | 37.75 |
| 6 | 29.5 | 62 | 37.25 |
| 7 | 33.75 | 62.5 | 36.75 |
| 8 | 38 | 63 | 36.25 |
| 9 | 42 | 63.5 | 35.75 |
| PW | 47 | 64 | 35.5 |
| AW | 51.5 | 64 | 35.5 |
Source: TaylorMade RocketBladez Tour 2013 catalog specification sheet. Checked 2026-10-04.
How to identify this generation
- Check the Tour marking on the cavity and compare the compact head with the Tour sheet.
What to notice in the specifications
- The quarter-degree 5-iron and 7-iron lofts are preserved: 25.25° and 33.75°. They are not rounded to whole degrees.
- This source ends at AW, 51.5°. Do not append standard RocketBladez SW or LW rows to the Tour table.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with TaylorMade
M2 irons (2016)
The original M2 generation, with a V-shaped cavity badge. Its wedge specifications differ from the 2017 M2.
M2 irons (2017)
The second M2 generation, identified by the manufacturer's Face Slot design and fin-style cavity badge.
M4 irons (2018)
The 2018 M4 generation. Its familiar 28.5° 7-iron loft does not make it the same head as an M2.
M6 irons (2019)
The M6 iron sheet lists separate steel lengths; this chart follows that published steel row.