Original iron specifications
TaylorMade M2 irons (2017)
The second M2 generation, identified by the manufacturer's Face Slot design and fin-style cavity badge.
Loft, lie & length chart
Published men's stock length. Women's lengths are separate in the source and are not represented by this table.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 19 | 61.5 | 38.88 |
| 5 | 21.5 | 62 | 38.25 |
| 6 | 25 | 62.5 | 37.63 |
| 7 | 28.5 | 63 | 37 |
| 8 | 33 | 63.5 | 36.5 |
| 9 | 38 | 64 | 36 |
| PW | 43.5 | 64.5 | 35.5 |
| AW | 49 | 64.5 | 35.5 |
| SW | 54 | 64.5 | 35.25 |
| LW | 59 | 64.5 | 35.25 |
Source: TaylorMade 2017 M2 iron specification sheet. Checked 2026-09-27. Values are recorded at the precision supplied by the source.
Checking a used set? These are published factory specifications, not measurements of the clubs you own. Loft, lie and length may have changed through custom ordering or later work.
How to identify this generation
- The 2017 product sheet introduces Face Slots near the heel and toe of the face.
- Compare the cavity's fin badge and six-sided fluted hosel with the 2017 manufacturer's sheet.
- The M2 name is reused. A listing that says only 'M2' does not identify the generation.
What to notice in the specifications
- The 4-iron lie is 61.5° and the 5-iron lie is 62°. The 2016 sheet lists 61° and 61.75° respectively.
- The 7-iron loft remains 28.5°, while the sand and lob wedges differ from the 2016 version.
- The 4-iron and 6-iron length figures are published as 38.88 and 37.63 inches. Their source precision is retained.
What the chart cannot tell you
A loft figure alone does not predict carry distance or determine a suitable fit. Head design, shaft, strike, swing speed and delivery also matter. Check actual loft and lie with a qualified fitter when a used set's history is uncertain.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
