TaylorMade RocketBladez irons (2013 catalog)
RocketBladez has a published 30.5° 7-iron and 45° pitching wedge in this factory chart.
Loft, lie & length chart
The shared length row in the 2013 catalog’s ordinary RocketBladez table. Steel and graphite swingweight figures are separate in the source.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 18 | 61 | 39.5 |
| 4 | 20 | 61.5 | 38.875 |
| 5 | 23 | 62 | 38.25 |
| 6 | 26.5 | 62.5 | 37.625 |
| 7 | 30.5 | 63 | 37 |
| 8 | 35 | 63.5 | 36.5 |
| 9 | 40 | 64 | 36 |
| PW | 45 | 64.5 | 35.5 |
| AW | 50 | 64.5 | 35.5 |
| SW | 55 | 64.5 | 35.25 |
| LW | 60 | 64.5 | 35 |
Source: TaylorMade RocketBladez 2013 catalog specification sheet. Checked 2026-10-04.
How to identify this generation
- Match the RocketBladez cavity badge with yellow accents; Tour and Max are separate head models.
What to notice in the specifications
- The manufacturer identifies a Speed Pocket in 3–7. Its absence on a short iron alone does not identify a different generation.
- The standard 7-iron is 30.5°, whereas RocketBladez Tour lists 33.75°. Keep the exact suffix in a comparison.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with TaylorMade
M2 irons (2016)
The original M2 generation, with a V-shaped cavity badge. Its wedge specifications differ from the 2017 M2.
M2 irons (2017)
The second M2 generation, identified by the manufacturer's Face Slot design and fin-style cavity badge.
M4 irons (2018)
The 2018 M4 generation. Its familiar 28.5° 7-iron loft does not make it the same head as an M2.
M6 irons (2019)
The M6 iron sheet lists separate steel lengths; this chart follows that published steel row.