PING iBlade irons (2019 US page)

Loft, lie & length chart

Standard lengths from PING’s US specification table, converted from fractional inches (38 7/8" = 38.875"). Colour-code lie and length adjustments are not substituted.

Source: PING iBlade irons US product page, Internet Archive capture of 2019-08-17. Checked 2026-10-07.

How to identify this generation

• iBLADE lettering sits near the top toe of a satin back; the pictured hosel also shows a blue colour-code dot, which marks a lie setting rather than the model.

What to notice in the specifications

• PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-17.
• Lie angles are PING’s standard specification. PING fits lie angle with a colour-coded dot, so check the dot on a used PING iron against PING’s colour code chart before assuming these lies.
• The table shows standard lofts. PING also lists Power Spec (32° 7-iron, 45° PW) as alternative factory loft builds, so a used set may not match the standard column.
• PING’s i59 page publishes the same standard loft, lie and length table, but the heads are different models. Use the model name on the head, not these numbers, to tell them apart.

Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.