PING G400 irons (2019 US page)
G400 from PING’s archived US product page, with a 30° 7-iron and 44.5° pitching wedge.
Loft, lie & length chart
Standard lengths from PING’s US specification table, converted from fractional inches (38 7/8" = 38.875"). Colour-code lie and length adjustments are not substituted.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 20.5 | 59.2 | 38.875 |
| 5 | 23.5 | 60.1 | 38.25 |
| 6 | 26.5 | 61.1 | 37.625 |
| 7 | 30 | 62 | 37 |
| 8 | 34.5 | 62.8 | 36.5 |
| 9 | 39.5 | 63.5 | 36 |
| PW | 44.5 | 64.1 | 35.5 |
| UW | 49.5 | 64.1 | 35.5 |
| SW | 54 | 64.4 | 35.25 |
| LW | 58 | 64.6 | 35 |
Source: PING G400 irons US product page, Internet Archive capture of 2019-08-17. Checked 2026-10-07.
How to identify this generation
- An orange G400 badge sits beside a dark cavity insert with a circular element.
What to notice in the specifications
- PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-17.
- Lie angles are PING’s standard specification. PING fits lie angle with a colour-coded dot, so check the dot on a used PING iron against PING’s colour code chart before assuming these lies.
- The table shows standard lofts. PING also lists Power Spec (28.5° 7-iron, 42.5° PW) as alternative factory loft builds, so a used set may not match the standard column.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with PING
G430 irons (2026 US page)
G430 from PING’s current US product page, with a 29° 7-iron and 41° pitching wedge.
G730 irons (2026 US page)
G730 from PING’s current US product page, with a 28° 7-iron and 40° pitching wedge.
G Le3 irons (2026 US page)
G Le3 from PING’s current US product page, with a 29.5° 7-iron and 46° pitching wedge.
i230 irons (2026 US page)
i230 from PING’s current US product page, with a 33° 7-iron and 45° pitching wedge.