Wilson D100 irons (2014 US page)
D100 from Wilson’s archived US product page, with a 31° 7-iron and 43° pitching wedge.
Loft, lie & length chart
Standard lengths from Wilson’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 21.5 | 60 | 39 |
| 5 | 24 | 61 | 38.5 |
| 6 | 27 | 61.5 | 38 |
| 7 | 31 | 62 | 37.5 |
| 8 | 35 | 63 | 37 |
| 9 | 39 | 63.5 | 36.5 |
| PW | 43 | 64 | 36 |
| GW | 47 | 64 | 36 |
| SW | 55 | 64 | 36 |
Source: Wilson Staff D100 irons page, Internet Archive capture of 2014-05-13. Checked 2026-10-16.
How to identify this generation
- A large red insert carrying the W/S shield fills the middle of a chrome cavity, with D100 lettering low near the toe.
What to notice in the specifications
- Wilson lists the sand wedge as a custom option. Gap and sand wedge share the pitching wedge’s 36 in length in this table.
- The D100 ES hybrid-iron set on the same site is a different product with its own heads.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Wilson
Staff Model Blade irons (2026 US page)
Staff Model Blade from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model CB irons (2026 US page)
Staff Model CB from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model XB irons (2026 US page)
Staff Model XB from Wilson’s current US product page, with a 32° 7-iron and 46° pitching wedge.
DynaPwr Forged irons (2026 US page)
DynaPwr Forged from Wilson’s current US product page, with a 30.5° 7-iron and 44° pitching wedge.