TaylorMade Stealth irons (2022)
The Stealth iron's 28° 7-iron and 43° pitching wedge distinguish its factory loft pattern from SIM2 Max.
Loft, lie & length chart
Published men's standard length row for Stealth irons. The booklet path reflects its publication cycle; the model is listed as 2022 irons.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 18.5 | 61.5 | 39.125 |
| 5 | 21 | 62 | 38.5 |
| 6 | 24 | 62.5 | 37.88 |
| 7 | 28 | 63 | 37.25 |
| 8 | 32 | 63.5 | 36.75 |
| 9 | 37 | 64 | 36.25 |
| PW | 43 | 64.5 | 35.75 |
| AW | 49 | 64.5 | 35.5 |
| SW | 54 | 64.5 | 35.25 |
| LW | 59 | 64.5 | 35 |
Source: TaylorMade custom component booklet, Stealth irons. Checked 2026-09-28. Values are recorded at the precision supplied by the source.
How to identify this generation
- Look for Stealth branding and the Cap Back cavity design in the manufacturer material.
- Stealth HD is a different variant; verify the exact model name before using this table.
What to notice in the specifications
- The listed 7-iron loft is 0.5° stronger than the SIM2 Max 7-iron.
- The pitching wedge is 43° in the Stealth chart, versus 43.5° in SIM2 Max.
- Equal stock lengths in parts of the two tables do not imply matching heads or flight.
What the chart cannot tell you
A loft figure alone does not predict carry distance or determine a suitable fit. Head design, shaft, strike, swing speed and delivery also matter. Check actual loft and lie with a qualified fitter when a used set's history is uncertain.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with TaylorMade
M2 irons (2016)
The original M2 generation, with a V-shaped cavity badge. Its wedge specifications differ from the 2017 M2.
M2 irons (2017)
The second M2 generation, identified by the manufacturer's Face Slot design and fin-style cavity badge.
M4 irons (2018)
The 2018 M4 generation. Its familiar 28.5° 7-iron loft does not make it the same head as an M2.
M6 irons (2019)
The M6 iron sheet lists separate steel lengths; this chart follows that published steel row.