Home/Club database/Iron sets/Z U85 utility irons
IRON SET MODEL REFERENCE

Srixon Z U85 utility irons (Z x85 lineup)

Z U85 utility iron from Srixon’s archived US product page, listed at 18°, 20°, 23°, 26° and 29° lofts.

Published loft options18, 20, 23, 26, 29°
Published heads2-iron, 3-iron, 4-iron, 5-iron, 6-iron
HandednessRH/LH 2–4; 5, 6 RH only per Srixon.
Srixon Z U85 utility irons (Z x85 lineup)
Model image · Srixon Z U85 utility irons. Image source ↗

Documented specifications & build options

Individually sold utility (driving) iron heads, not a full iron set. Lengths are the archived standard build in inches.

Srixon Z U85 utility irons · manufacturer specifications
FieldDocumented value
Published loft options18, 20, 23, 26, 29 °
Published heads2-iron, 3-iron, 4-iron, 5-iron, 6-iron
HandednessRH/LH 2–4; 5, 6 RH only per Srixon.

Source: Srixon Z U85 utility irons US product page, Internet Archive capture of 2019-07-22. Reviewed 2026-10-07.

Published specifications by club

Srixon Z U85 utility irons · documented configurations
ConfigurationPublished values
2-iron ↗
Loft: 18 °
Lie: 59.5 °
Length: 40 in
Handedness: RH/LH
3-iron ↗
Loft: 20 °
Lie: 60 °
Length: 39.5 in
Handedness: RH/LH
4-iron ↗
Loft: 23 °
Lie: 60.5 °
Length: 39 in
Handedness: RH/LH
5-iron ↗
Loft: 26 °
Lie: 61 °
Length: 38.5 in
Handedness: RH
6-iron ↗
Loft: 29 °
Lie: 61.5 °
Length: 38 in
Handedness: RH

Identifying the right model

  • The utility back has SRIXON above a Z U85 marking, with a small round dot near the top toe in the photo.

What to check before using the reference

  • Srixon’s live US site no longer lists this model. The figures come from an Internet Archive capture of Srixon’s own US product page dated 2019-07-22.
  • The archived table gives graphite swing weights only, so the listed lengths are read as the graphite stock build; steel lengths are not inferred.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.