PING G710 irons (2021 US page)

Loft, lie & length chart

Standard lengths from PING’s US specification table, converted from fractional inches (38 7/8" = 38.875"). Colour-code lie and length adjustments are not substituted.

Source: PING G710 irons US product page, Internet Archive capture of 2021-06-14. Checked 2026-10-07.

How to identify this generation

• The pictured head has a black finish with a G710 marking near the lower toe.

What to notice in the specifications

• PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2021-06-14.
• Lie angles are PING’s standard specification. PING fits lie angle with a colour-coded dot, so check the dot on a used PING iron against PING’s colour code chart before assuming these lies.
• The table shows standard lofts. PING also lists Power Spec (28° 7-iron, 43° PW) and Retro Spec (31.8° 7-iron, 46.5° PW) as alternative factory loft builds, so a used set may not match the standard column.
• PING’s G700 page publishes the same standard loft, lie and length table, but the heads are different models. Use the model name on the head, not these numbers, to tell them apart.

Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.