DRIVER MODEL REFERENCE

PING G430 LST (2026 US page)

G430 LST driver from PING’s current US product page: 2 heads from 9.0° to 10.5°, 45.75 in standard length.

Published loft options9.0, 10.5°
Published length45.75 in
Published lie56.5°
PING G430 LST (2026 US page)
Model image · PING G430 LST. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G430 LST · manufacturer specifications
FieldDocumented value
Published loft options9.0, 10.5 °
Published length45.75 in
Published lie56.5 °
Published head volume440 cc
Listed shaft optionsPING ALTA CB Black 55; PING ALTA Quick; PING Tour 2.0 Chrome 65; PING Tour 2.0 Black 65; Mitsubishi Kai'li White 60; Project X HZRDUS Smoke Red RDX 50; Project X HZRDUS Smoke Red RDX 60

Source: PING G430 LST driver US product page. Reviewed 2026-10-09.

Specifications by configuration

PING G430 LST · documented configurations
ConfigurationPublished values
9.0° head ↗
Loft: 9.0 °
Loft adjustability: ±1.5°
Length: 45.75 in
Lie: 56.5 °
Head weight: 208 g
Head volume: 440 cc
Swing weight: D4
10.5° head ↗
Loft: 10.5 °
Loft adjustability: ±1.5°
Length: 45.75 in
Lie: 56.5 °
Head weight: 208 g
Head volume: 440 cc
Swing weight: D4

Identifying the right model

  • A large grey PING wordmark sits on a black sole with LST lettering near the toe and yellow accent lines.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • The table gives the standard setting of each head. PING lists ±1.5° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.