HYBRID MODEL REFERENCE
PING G400 (2019 US page)
G400 hybrid from PING’s archived US product page: 5 heads from 17.0° to 30.0°, 38.75–40.75 in standard length.
Published loft options17.0, 19.0, 22.0, 26.0, 30.0°
Published length range38.75–40.75 in
Published lie range58.0–60.0°

Documented specifications & build options
Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").
| Field | Documented value |
|---|---|
| Published loft options | 17.0, 19.0, 22.0, 26.0, 30.0 ° |
| Published heads | 2-hybrid, 3-hybrid, 4-hybrid, 5-hybrid, 6-hybrid |
| Published length range | 38.75–40.75 in |
| Published lie range | 58.0–60.0 ° |
| Listed shaft options | PING Alta CB 70; PING Tour 85 |
Source: PING G400 hybrid US product page, Internet Archive capture of 2019-08-19. Reviewed 2026-10-09.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 2-hybrid · 17.0° ↗ | Loft: 17.0 ° Length: 40.75 in Lie: 58.0 ° Swing weight: D1 Equivalent iron (PING): 2-iron |
| 3-hybrid · 19.0° ↗ | Loft: 19.0 ° Length: 40.25 in Lie: 58.5 ° Swing weight: D1 Equivalent iron (PING): 3-iron |
| 4-hybrid · 22.0° ↗ | Loft: 22.0 ° Length: 39.75 in Lie: 59.0 ° Swing weight: D1 Equivalent iron (PING): 4-iron |
| 5-hybrid · 26.0° ↗ | Loft: 26.0 ° Length: 39.25 in Lie: 59.5 ° Swing weight: D1 Equivalent iron (PING): 5-iron |
| 6-hybrid · 30.0° ↗ | Loft: 30.0 ° Length: 38.75 in Lie: 60.0 ° Swing weight: D1 Equivalent iron (PING): 6-iron |
Identifying the right model
- The dark sole has an orange-trimmed weight, a PING wordmark running toward the toe and a G400 badge.
- Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.
What to check before using the reference
- PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-19.
- PING’s G hybrid page publishes the same head table, but the heads are different models. Use the model name on the head, not these numbers, to tell them apart.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



