PUTTER MODEL REFERENCE
Cobra MIM Stingray · Putter
MIM Stingray specifications: Mallet head type, 33.00, 34.00, 35.00 in published length options.
Published length options33.00, 34.00, 35.00 in
Head typeMallet
Hosel typeSingle Bend
Documented specifications & build options
The manufacturer’s documented configuration at the review date.
| Field | Documented value |
|---|---|
| Published length options | 33.00, 34.00, 35.00 in |
| Head type | Mallet |
| Hosel type | Single Bend |
| Descending face loft zones | DLT: 4°, 3°, 2°, 1° |
| Published lie angle | 70.0 ° |
Source: Cobra MIM Stingray product specifications. Reviewed 2026-10-03.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 33.00" stock build ↗ | Length: 33.00 in Head weight: 375.0 g Lie: 70.0 ° Hosel: Single Bend Face loft zones: DLT: 4°, 3°, 2°, 1° |
| 34.00" stock build ↗ | Length: 34.00 in Head weight: 370.0 g Lie: 70.0 ° Hosel: Single Bend Face loft zones: DLT: 4°, 3°, 2°, 1° |
| 35.00" stock build ↗ | Length: 35.00 in Head weight: 365.0 g Lie: 70.0 ° Hosel: Single Bend Face loft zones: DLT: 4°, 3°, 2°, 1° |
Identifying the right model
- Match the MIM Stingray model marking and the documented face or head construction with the linked manufacturer listing.
What to check before using the reference
- The face uses descending loft zones, rather than one uniform loft. Head weight is recorded by stock length; do not treat the two builds as the same weight.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring putters
CobraPutter
3DP TOUR AGERA
3DP TOUR AGERA putter reference with documented 34, 35 inch length choices. Match the exact head and shaft configuration before comparing the build.
4, 3, 2, 1° Face loft zones (DLT)Model reference
CobraPutter
3DP TOUR AGERA RS
3DP TOUR AGERA RS specifications: Mallet head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
CobraPutter
3DP TOUR GRANDSPORT 35
3DP TOUR GRANDSPORT 35 specifications: Oversize Blade head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
CobraPutter
3DP TOUR SUPERNOVA
3DP TOUR SUPERNOVA specifications: Oversize Fang head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference