PUTTER MODEL REFERENCE
Cobra 3DP TOUR GRANDSPORT 35 · Putter
3DP TOUR GRANDSPORT 35 specifications: Oversize Blade head type, 34.00, 35.00 in published length options.
Published length options34.00, 35.00 in
Head typeOversize Blade
Hosel typePlumber
Documented specifications & build options
The manufacturer’s documented configuration at the review date.
| Field | Documented value |
|---|---|
| Published length options | 34.00, 35.00 in |
| Head type | Oversize Blade |
| Hosel type | Plumber |
| Descending face loft zones | DLT: 4°, 3°, 2°, 1° |
| Published lie angle | 70.0 ° |
Source: Cobra 3DP TOUR GRANDSPORT 35 product specifications. Reviewed 2026-10-03.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 34.00" stock build ↗ | Length: 34.00 in Head weight: 365.0 g Lie: 70.0 ° Hosel: Plumber Face loft zones: DLT: 4°, 3°, 2°, 1° |
| 35.00" stock build ↗ | Length: 35.00 in Head weight: 355.0 g Lie: 70.0 ° Hosel: Plumber Face loft zones: DLT: 4°, 3°, 2°, 1° |
Identifying the right model
- Match the 3DP TOUR GRANDSPORT 35 model marking and the documented face or head construction with the linked manufacturer listing.
What to check before using the reference
- The face uses descending loft zones, rather than one uniform loft. Head weight is recorded by stock length; do not treat the two builds as the same weight.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring putters
CobraPutter
3DP TOUR AGERA
3DP TOUR AGERA putter reference with documented 34, 35 inch length choices. Match the exact head and shaft configuration before comparing the build.
4, 3, 2, 1° Face loft zones (DLT)Model reference
CobraPutter
3DP TOUR AGERA RS
3DP TOUR AGERA RS specifications: Mallet head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
CobraPutter
3DP TOUR SUPERNOVA
3DP TOUR SUPERNOVA specifications: Oversize Fang head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
CobraPutter
MIM Blazer
MIM Blazer specifications: Mallet head type, 34.00, 35.00 in published length options.
DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference