Home/Brands/Adams irons/Redline (2011 US page)
Original iron specifications

Adams Redline irons (2011 US page)

Adams Redline irons from the archived 2011 US product page, with a 31° 7-iron and 44° pitching wedge.

7-iron loft
31°
Pitching wedge loft
44°
7-iron length
37.25 in
Compare this iron generation →
Adams Redline irons, 2011 US page generation
Model image · Adams Redline irons (2011 US page). View image source ↗

Loft, lie & length chart

Adams’ standard men’s specification table from the archived US product page: loft, lie and length in inches, one length per club for the stock graphite and steel builds.

Adams Redline irons (2011 US page) · angles in degrees, length in inches
ClubLoft (°)Lie (°)Length (in)
31959.540
4216039.25
5246138.5
62761.537.875
7316237.25
83562.536.625
9406336
PW4463.535.75
GW4963.7535.5
SW546435.25
LW596435

Source: Adams Golf “Redline Hybrid Irons” specifications page (adamsgolf.com), Internet Archive capture of 2011-04-20. Checked 2026-10-22.

How to identify this generation

  • Adams’ set photo shows chrome Redline irons with a red-and-silver cavity badge, with the hybrids in black crowns and red face-side accents on black graphite shafts at the long end.

What to notice in the specifications

  • Adams sells this set with hybrids in place of the long irons; the same table lists the 2 hybrid (17°, 57.75°, 41.5 in), 3 hybrid (19°, 58.5°, 40.5 in), 4 hybrid (21°, 59.25°, 39.5 in) and 5 hybrid (24°, 60°, 38.5 in) as loft, lie and length. Those hybrid rows are kept out of the chart.
  • Adams offers three set makeups on the page that mix the 2 to 5 hybrids with the 3 to LW irons; the hybrid and iron rows that share a number also share a loft (19°, 21°, 24°).
  • Adams lists the 2 hybrid and 3-iron as right-hand only; the other clubs are marked R and L.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.

Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.