Wilson Launch Pad irons (2021 US page)
Launch Pad from Wilson’s archived US product page, with a 30° 7-iron and 44° pitching wedge.
Loft, lie & length chart
Standard lengths from Wilson’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 21 | 60 | 39 |
| 5 | 24 | 61 | 38.5 |
| 6 | 27 | 61.5 | 38 |
| 7 | 30 | 62 | 37.5 |
| 8 | 34 | 63 | 37 |
| 9 | 39 | 63.5 | 36.5 |
| PW | 44 | 64 | 36 |
| GW | 49 | 64 | 35.75 |
| SW | 55 | 64 | 35.5 |
Source: Wilson Launch Pad steel irons page, Internet Archive capture of 2021-10-18. Checked 2026-10-16.
How to identify this generation
- Large outlined LP lettering and LAUNCH PAD run up the back toward the toe, above a very wide, dark sole section that carries the W/S shield.
What to notice in the specifications
- Wilson shows this table as an image on the page; the values were transcribed from it. The gap and sand wedges are marked as custom options, so the stock set runs 4-iron to PW.
- Wilson later sold Launch Pad 2 irons under the same name; this chart is for the first Launch Pad set (product code WG1P0022, WGR195000 on the photo).
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Wilson
Staff Model Blade irons (2026 US page)
Staff Model Blade from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model CB irons (2026 US page)
Staff Model CB from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model XB irons (2026 US page)
Staff Model XB from Wilson’s current US product page, with a 32° 7-iron and 46° pitching wedge.
DynaPwr Forged irons (2026 US page)
DynaPwr Forged from Wilson’s current US product page, with a 30.5° 7-iron and 44° pitching wedge.