Wilson D7 Forged irons (2020 US page)
D7 Forged from Wilson’s archived US product page, with a 30.5° 7-iron and 44° pitching wedge.
Loft, lie & length chart
Standard lengths from Wilson’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 19 | 59.5 | 39.25 |
| 4 | 21.5 | 60 | 38.75 |
| 5 | 24.5 | 61 | 38.25 |
| 6 | 27.5 | 61.5 | 37.75 |
| 7 | 30.5 | 62 | 37.25 |
| 8 | 34.5 | 63 | 36.75 |
| 9 | 39 | 63.5 | 36.25 |
| PW | 44 | 64 | 35.75 |
| GW | 49 | 64 | 35.5 |
Source: Wilson Staff D7 Forged irons custom 7-piece set page, Internet Archive capture of 2020-11-26. Checked 2026-10-16.
How to identify this generation
- A satin back panel carries the W/S shield, with FORGED above the panel near the hosel, POWER CHAMBER along its heel side and D7 low near the toe; three slots are cut into the upper toe.
- The D7 name also appears on these Wilson irons; compare their markings before using this chart: D7 (2019 US page).
What to notice in the specifications
- Wilson’s table gives 4-iron to PW as the stock set and lists the 3-iron and gap wedge as custom options.
- Wilson’s DynaPwr Forged page lists exactly the same lofts, lies and lengths from 3-iron to GW for a different head.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Wilson
D7 irons (2019 US page)
D7 from Wilson’s archived US product page, with a 28° 7-iron and 43° pitching wedge.
Staff Model Blade irons (2026 US page)
Staff Model Blade from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model CB irons (2026 US page)
Staff Model CB from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model XB irons (2026 US page)
Staff Model XB from Wilson’s current US product page, with a 32° 7-iron and 46° pitching wedge.