Wilson C300 Forged Gun Metal irons (2020 US page)
C300 Forged Gun Metal from Wilson’s archived US product page, with a 33° 7-iron and 45° pitching wedge.
Loft, lie & length chart
Standard lengths from Wilson’s US specification table, in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 23 | 60 | 38.75 |
| 5 | 26 | 61 | 38.25 |
| 6 | 29 | 61.5 | 37.75 |
| 7 | 33 | 62 | 37.25 |
| 8 | 37 | 63 | 36.75 |
| 9 | 41 | 63.5 | 36.25 |
| PW | 45 | 64 | 35.75 |
| GW | 49 | 64 | 35.5 |
Source: Wilson C300 Forged Gun Metal steel irons (4-GW) page, Internet Archive capture of 2020-11-11. Checked 2026-10-16.
How to identify this generation
- An all-black gun-metal head with C300 above FORGED at the upper toe, a raised W/S shield in the middle of the cavity and FLX FACE lettering low in the cavity.
What to notice in the specifications
- Wilson shows this table as an image on the page; the values were transcribed from it. It lists every club, 4-iron to GW, for right-handed players only.
- This is the gun-metal finish of the C300 Forged. No archived chart for the chrome C300 Forged was found, so the table is not confirmed for chrome heads.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Wilson
Staff Model Blade irons (2026 US page)
Staff Model Blade from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model CB irons (2026 US page)
Staff Model CB from Wilson’s current US product page, with a 34° 7-iron and 46° pitching wedge.
Staff Model XB irons (2026 US page)
Staff Model XB from Wilson’s current US product page, with a 32° 7-iron and 46° pitching wedge.
DynaPwr Forged irons (2026 US page)
DynaPwr Forged from Wilson’s current US product page, with a 30.5° 7-iron and 44° pitching wedge.