Home/Club database/Wedges/Hot Launch E525
WEDGE MODEL REFERENCE

Tour Edge Hot Launch E525 (2026 US page)

Hot Launch E525 wedge reference from Tour Edge’s US certified pre-owned listing with 6 published configurations from 50° to 60°, 10–13° bounce.

Published loft options
50, 52, 54, 56, 58, 60°
Published bounce range
10–13°
Standard lie
64°
Tour Edge Hot Launch E525 (2026 US page)
Model image · Tour Edge Hot Launch E525. Image source ↗

Documented specifications & build options

Loft, lie, bounce and stock length for each wedge from the table on Tour Edge’s certified pre-owned listing, in inches.

Tour Edge Hot Launch E525 · manufacturer specifications
FieldDocumented value
Published loft options50, 52, 54, 56, 58, 60 °
Published bounce range10–13 °
Standard lie64 °
Published standard length range35–35.5 in
Listed shaft optionsUST Mamiya Helium Black; True Temper Elevate MPH 95

Source: Tour Edge Hot Launch E525 certified pre-owned listing specifications (touredge.com). Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Hot Launch E525 · documented configurations
ConfigurationPublished values
50°, 13° bounce ↗
Loft: 50 °
Lie: 64 °
Bounce: 13 °
Length: 35.5 in
Hand: RH
52°, 13° bounce ↗
Loft: 52 °
Lie: 64 °
Bounce: 13 °
Length: 35.5 in
Hand: RH/LH
54°, 13° bounce ↗
Loft: 54 °
Lie: 64 °
Bounce: 13 °
Length: 35.25 in
Hand: RH
56°, 13° bounce ↗
Loft: 56 °
Lie: 64 °
Bounce: 13 °
Length: 35.25 in
Hand: RH/LH
58°, 10° bounce ↗
Loft: 58 °
Lie: 64 °
Bounce: 10 °
Length: 35 in
Hand: RH
60°, 10° bounce ↗
Loft: 60 °
Lie: 64 °
Bounce: 10 °
Length: 35 in
Hand: RH/LH

Identifying the right model

  • A chrome cavity wedge with Tour Edge over an orange line and E525 at the toe, HOT LAUNCH toward the heel, VIBRCOR on a black bar above and a dark carbon-pattern insert low in the cavity; 56 is stamped on the sole.

What to check before using the reference

  • The listing says all lofts come right-handed and the 52°, 56° and 60° also left-handed; bounce is 13° through 56° and 10° on the 58° and 60°.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.