PUTTER MODEL REFERENCE
TaylorMade Spider Interactive (2018 archive edition)
Spider Interactive putter (2018 sheet): 3° loft, 70° lie, 34, 35 in lengths, 355 / 350 g head weight; hosels L Neck (#1), Double Bend (#7).
- Published loft
- 3°
- Published lie angle
- 70°
- Published length options
- 34, 35 in

Documented specifications & build options
Factory sell sheet linked from TaylorMade’s year-by-year archive: one row per hosel or finish option as printed, lengths in inches and head weights in grams for the stock build.
| Field | Documented value |
|---|---|
| Published loft | 3 ° |
| Published lie angle | 70 ° |
| Published length options | 34, 35 in |
| Head weights | 355, 350 g |
| Hosel options | L Neck (#1), Double Bend (#7) |
| Toe hang | 21°, Face balanced |
| Insert | Surlyn 64D (soft) |
Source: TaylorMade Spider Interactive 2018 factory specification sheet. Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| L Neck #1 ↗ | Loft: 3 ° Lie: 70 ° Length options: 34, 35 in Head weight: 355 g Hosel: L Neck (#1) Sightline: Yes Toe hang: 21° Offset: Full shaft Insert: Surlyn 64D (soft) Hand: RH/LH Grip: SuperStroke Mid Slim 2.0 with Blast sensor housing |
| Double Bend #7 ↗ | Loft: 3 ° Lie: 70 ° Length options: 34, 35 in Head weight: 350 g Hosel: Double Bend (#7) Sightline: Yes Toe hang: Face balanced Offset: Half shaft Insert: Surlyn 64D (soft) Hand: RH/LH Grip: SuperStroke Mid Slim 2.0 with Blast sensor housing |
Identifying the right model
- The sheet's 3/4 view shows the silver Spider Interactive from behind: a chrome square frame with a black carbon-fibre centre panel carrying Spider script in orange, a TOUR bar and a Blast logo, round weight ports at the rear corners, a white TaylorMade bar on the toe-side wing and the shaft entering on the heel side.
What to check before using the reference
- The head is the Spider Tour in a silver finish sold with a Blast Motion sensor in the grip cap; the two hosels give a 21° toe hang (L neck, 355 g) or a face-balanced double bend (350 g).
- The sheet carries a 2017 copyright line and is filed under 2018; loft and lie are printed without degree signs.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



