Home/Club database/Putters/Daddy Long Legs
PUTTER MODEL REFERENCE

TaylorMade Daddy Long Legs (2013 archive edition)

Daddy Long Legs putter (2013 sheet): 2.5° loft, 70° lie, 35, 38 in lengths, 395 g head weight.

Published loft
2.5°
Published lie angle
70°
Published length options
35, 38 in
TaylorMade Daddy Long Legs (2013 archive edition)
Model image · TaylorMade Daddy Long Legs. Image source ↗

Documented specifications & build options

Factory sell sheet linked from TaylorMade’s year-by-year archive: one row per hosel or finish option as printed, lengths in inches and head weights in grams for the stock build.

TaylorMade Daddy Long Legs · manufacturer specifications
FieldDocumented value
Published loft2.5 °
Published lie angle70 °
Published length options35, 38 in
Head weight395 g
Head typeHigh MOI Mallet
Toe hangFace balanced
InsertPure Roll Surlyn

Source: TaylorMade Daddy Long Legs 2013 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

TaylorMade Daddy Long Legs · documented configurations
ConfigurationPublished values
Daddy Long Legs ↗
Loft: 2.5 °
Lie: 70 °
Length options: 35, 38 in
Head weight: 395 g
Head type: High MOI Mallet
Material: Multi-Material
Toe hang: Face balanced
Offset: 1/2 shaft
Shaft: Single Bend
Insert: Pure Roll Surlyn
Hand: RH / LH
Grip: Winn Daddy Long Legs counterbalance grip, 14.75 in, 130 g

Identifying the right model

  • The sheet's hero shows the Daddy Long Legs from behind: a white wing frame with black rear weight arms, a red centre panel lettered Daddy Long Legs with a round TaylorMade weight disc and two screws, TaylorMade lettered along the top edge of the panel and the shaft entering on the heel side.

What to check before using the reference

  • The sheet lists one counterbalanced build at 35 in and 38 in with a 395 g head and a 130 g grip; it names a 206 g steel frame, 159 g aluminium centre, 35 g of heel/toe tungsten and a 16 g polycarbonate plate.
  • Custom options on the sheet run to ±3 in length with a 39.5 in maximum.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.