DRIVER MODEL REFERENCE

Srixon ZXi RKT LS · Driver

Srixon ZXi RKT LS driver from Dunlop Sports’ US product page: 3 lofts (8°, 9°, 10.5°), 460 cc head, 45.75 in standard length.

Published loft options
8, 9, 10.5°
Published lie
59°
Published length
45.75 in
Srixon ZXi RKT LS · Driver
Model image · Srixon ZXi RKT LS. Image source ↗

Documented specifications & build options

Stock build and standard hosel setting from Dunlop Sports’ US specification table for Srixon; lengths in inches, swing and club weights as published per flex.

Srixon ZXi RKT LS · manufacturer specifications
FieldDocumented value
Published loft options8, 9, 10.5 °
Published lie59 °
Published length45.75 in
Published head volume460 cc
Stock shaftMitsubishi Kai'li Dark Waves White 60

Source: Srixon ZXi RKT LS driver US product page (Dunlop Sports US store). Reviewed 2026-10-22.

Specifications by configuration

Srixon ZXi RKT LS · documented configurations
ConfigurationPublished values
8.0° ↗
Loft: 8 °
Lie: 59 °
Length: 45.75 in
Head volume: 460 cc
Handedness: RH
Swing weight: D4
Club weight: 321g(X), 319g(S)
9.0° ↗
Loft: 9 °
Lie: 59 °
Length: 45.75 in
Head volume: 460 cc
Handedness: RH/LH
Swing weight: D4
Club weight: 321g(X), 319g(S)
10.5° ↗
Loft: 10.5 °
Lie: 59 °
Length: 45.75 in
Head volume: 460 cc
Handedness: RH/LH
Swing weight: D4
Club weight: 319g(S), 317g(R)

Identifying the right model

  • Two red-rimmed weight ports sit on a front-to-back line across the black textured sole with LS lettering below them; ZXi RKT sits above, SRIXON on the rear edge and 9.0 beside the hosel.

What to check before using the reference

  • Srixon’s page describes adjustable sole weights placed front and rear for spin and an adjustable hosel; no adjustment range is stated, so the table figures are the stock setting.
  • The 8.0° head is right-hand only; 9.0° and 10.5° are listed in both hands.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.