DRIVER MODEL REFERENCE

Srixon ZXi · Driver

Srixon ZXi driver from Dunlop Sports’ US product page: 2 lofts (9°, 10.5°), 460 cc head, 45.75 in standard length.

Published loft options
9, 10.5°
Published lie
59°
Published length
45.75 in
Srixon ZXi · Driver
Model image · Srixon ZXi. Image source ↗

Documented specifications & build options

Stock build and standard hosel setting from Dunlop Sports’ US specification table for Srixon; lengths in inches, swing and club weights as published per flex.

Srixon ZXi · manufacturer specifications
FieldDocumented value
Published loft options9, 10.5 °
Published lie59 °
Published length45.75 in
Published head volume460 cc
Stock shaftFUJIKURA VENTUS TR BLUE 6

Source: Srixon ZXi driver US product page (Dunlop Sports US store). Reviewed 2026-10-22.

Specifications by configuration

Srixon ZXi · documented configurations
ConfigurationPublished values
9.0° ↗
Loft: 9 °
Lie: 59 °
Length: 45.75 in
Head volume: 460 cc
Handedness: RH/LH
Swing weight: D3
Club weight: 316g (X), 315g (S,R)
10.5° ↗
Loft: 10.5 °
Lie: 59 °
Length: 45.75 in
Head volume: 460 cc
Handedness: RH/LH
Swing weight: D3

Identifying the right model

  • The black sole carries a white SRIXON wordmark across the centre, ZXi lettering on the rear edge, a 9.0 loft marking low beside the hosel and two red-rimmed weight ports, one toward the heel and one toward the toe (the heel-side one marked 10); the hosel sleeve reads LOFT STD.

What to check before using the reference

  • Srixon’s page describes a 1.5-degree adjustable hosel sleeve for loft, lie and face angle and two adjustable sole weights in the heel and toe; the table gives the stock setting only and states no adjustment range.
  • Srixon’s footnote says its published driver lengths now follow USGA and R&A measurement guidelines and read about ½ in longer than before without the club itself changing.
  • The ZXi LS and ZXi MAX drivers from the same lineup have their own records; the ZXi RKT drivers are a later lineup with separate pages.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.