DRIVER MODEL REFERENCE
Srixon ZX5 LS Mk II (Mk II)
Srixon ZX5 LS Mk II driver from Dunlop Sports’ US product page: 3 lofts (8.5°, 9.5°, 10.5°), 460 cc head, 45.25 in standard length.
- Published loft options
- 8.5, 9.5, 10.5°
- Published lie
- 58.5°
- Published length
- 45.25 in

Documented specifications & build options
Stock build and standard hosel setting from Dunlop Sports’ US specification table for Srixon; lengths in inches, swing and club weights as published per flex.
| Field | Documented value |
|---|---|
| Published loft options | 8.5, 9.5, 10.5 ° |
| Published lie | 58.5 ° |
| Published length | 45.25 in |
| Published head volume | 460 cc |
| Stock shaft | PROJECT X HZRDUS BLACK GEN 4 70/60 |
Source: Srixon ZX5 LS Mk II driver US product page (Dunlop Sports US store). Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 8.5° ↗ | Loft: 8.5 ° Lie: 58.5 ° Length: 45.25 in Head volume: 460 cc Handedness: RH Swing weight: D3(R,S), D4(X) Club weight: 314g(S), 324g(X) |
| 9.5° ↗ | Loft: 9.5 ° Lie: 58.5 ° Length: 45.25 in Head volume: 460 cc Handedness: RH Swing weight: D3(R,S), D4(X) Club weight: 314g(S), 324g(X) |
| 10.5° ↗ | Loft: 10.5 ° Lie: 58.5 ° Length: 45.25 in Head volume: 460 cc Handedness: RH Swing weight: D3(R,S) Club weight: 314g(S) |
Identifying the right model
- A matte black sole with SRIXON across the top, a large ZX 5 with Mk II beneath it, LS near the top edge, a single round weight port on the forward heel side, red REBOUND FRAME lettering on the rear edge and 9.5 LS beside the hosel; the sleeve reads STD LOFT.
What to check before using the reference
- Srixon’s page describes a 12-position adjustable hosel with loft settings marked STD LOFT, -1 LOFT, +1 LOFT and STD FL, and one 8 g sole weight placed forward; the table gives the standard setting only.
- All three lofts are listed right-hand only on this page.
- The ZX5 Mk II and ZX7 Mk II drivers are different heads from the same lineup and are not covered by this record.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



