PUTTER MODEL REFERENCE
PING Scottsdale Anser 2D · Putter
Scottsdale Anser 2D specifications: Blade head type, 360 g head weight.
Published loft3°
Standard length35 in
Head weight360 g
Documented specifications & build options
The manufacturer’s documented configuration at the review date.
| Field | Documented value |
|---|---|
| Published loft | 3 ° |
| Standard length | 35 in |
| Head weight | 360 g |
| Head type | Blade |
| Hosel code | H1 |
| Face construction | One-piece PEBAX insert |
| Manufacturer lie-angle value | 20° ±4° |
Source: PING Scottsdale Anser 2D product specifications. Reviewed 2026-10-03.
Identifying the right model
- Match the Scottsdale Anser 2D model marking and the documented face or head construction with the linked manufacturer listing.
What to check before using the reference
- PING prints the lie-angle value using its own source notation. Confirm the measurement convention before comparing it with another maker's putter lie figure; the printed number is preserved here.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring putters
PINGPutter
Scottsdale TEC Ketsch Onset
Scottsdale TEC Ketsch Onset putter reference with documented 35 inch length choices. Match the exact head and shaft configuration before comparing the build.
3° Published loftModel reference
PINGPutter
PLD Milled Ally Blue 4
PLD Milled Ally Blue 4 specifications: Mallet head type, 370 g head weight.
3° Published loftModel reference
PINGPutter
PLD Milled Anser
PLD Milled Anser specifications: Blade head type, 3 ° published loft.
3° Published loftModel reference
PINGPutter
PLD Milled DS72
PLD Milled DS72 specifications: Mid Mallet head type, 365 g head weight.
3° Published loftModel reference