PING PLD Milled Oslo · Putter
PLD Milled Oslo specifications: Mallet head type, 3 ° published loft.
Documented specifications & build options
This family reference groups the named manufacturer listings. Read the configuration entries for each version; matching a family name alone does not establish its length, weight, angles, finish or face milling.
| Field | Documented value |
|---|---|
| Published loft | 3 ° |
| Head type | Mallet |
| Documented versions | PLD Milled Oslo 3, PLD Milled Oslo 4, PLD Milled Oslo C, PLD Milled Oslo CB, PLD Milled Oslo L |
Source: PING PLD Milled Oslo manufacturer listings. Reviewed 2026-10-03.
Specifications by configuration
| Configuration | Published values |
|---|---|
| PLD Milled Oslo 3 ↗ | Published loft: 3 ° Standard length: 35 in Head weight: 375 g Head type: Mallet Hosel code: H4 Face construction: Deep AMP Documented finish: Gunmetal Manufacturer lie-angle value: 20° ±4° |
| PLD Milled Oslo 4 ↗ | Published loft: 3 ° Standard length: 35 in Head weight: 375 g Head type: Mallet Hosel code: H4 Face construction: Deep AMP Documented finish: Matte Black Manufacturer lie-angle value: 20° ±4° |
| PLD Milled Oslo C ↗ | Published loft: 3 ° Standard length: 35 in Head weight: 360 g Head type: Mallet Hosel code: CS Face construction: Shallow Milled Manufacturer lie-angle value: 20° ±4° |
| PLD Milled Oslo CB ↗ | Published loft: 3 ° Standard length: 37.75 in Head weight: 380 g Head type: Mallet Hosel code: DB Face construction: Shallow Milled Manufacturer lie-angle value: 20° ±2° |
| PLD Milled Oslo L ↗ | Published loft: 3 ° Standard length: 47 in Head weight: 475 g Head type: Mallet Hosel code: CS Face construction: Shallow milled Manufacturer lie-angle value: 11° (non-adjustable) |
Related stock build variants
These packages are documented under the same model reference. Check each linked source before treating the shaft or contents as identical.
Identifying the right model
- Match the complete model name, including the suffix, with one of the linked manufacturer configurations below.
What to check before using the reference
- These are separately documented configurations and may span changes to the head or finish. Release years are unverified; the table preserves the named versions without assuming identical factory specifications.
- PING prints the lie-angle value using its own source notation. Confirm the measurement convention before comparing it with another maker's putter lie figure; the printed number is preserved here.
Continue exploring putters
Scottsdale TEC Ketsch Onset
Scottsdale TEC Ketsch Onset putter reference with documented 35 inch length choices. Match the exact head and shaft configuration before comparing the build.
PLD Milled Ally Blue 4
PLD Milled Ally Blue 4 specifications: Mallet head type, 370 g head weight.
PLD Milled Anser
PLD Milled Anser specifications: Blade head type, 3 ° published loft.
PLD Milled DS72
PLD Milled DS72 specifications: Mid Mallet head type, 365 g head weight.