FAIRWAY WOOD MODEL REFERENCE

PING G440 LST (2026 US page)

G440 LST fairway wood from PING’s current US product page: 2 heads from 15.0° to 19.0°, 42.5–43 in standard length.

Published loft options15.0, 19.0°
Published heads3-wood, 5-wood
Published length range42.5–43 in
PING G440 LST (2026 US page)
Model image · PING G440 LST. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G440 LST · manufacturer specifications
FieldDocumented value
Published loft options15.0, 19.0 °
Published heads3-wood, 5-wood
Published length range42.5–43 in
Published lie range56.0–56.5 °
Published head volume176–190 cc
Listed shaft optionsPING ALTA CB Blue 65; PING Tour 2.0 Chrome 65; PING Tour 2.0 Black 65; PING Tour 2.0 Chrome 75; PING Tour 2.0 Black 75; Mitsubishi Tensei 1K Black 75; Project X Denali Red 60; Project X Denali Red 70; PING ALTA Quick

Source: PING G440 LST fairway wood US product page. Reviewed 2026-10-09.

Specifications by configuration

PING G440 LST · documented configurations
ConfigurationPublished values
3-wood · 15.0° ↗
Loft: 15.0 °
Loft adjustability: ±1.5°
Length: 43 in
Lie: 56.0 °
Head weight: 219.7 g
Head volume: 190 cc
Swing weight: D3
5-wood · 19.0° ↗
Loft: 19.0 °
Loft adjustability: ±1.5°
Length: 42.5 in
Lie: 56.5 °
Head weight: 224 g
Head volume: 176 cc
Swing weight: D3

Identifying the right model

  • PING runs diagonally across the black sole, with a blue G440 marking toward the toe and LST lettering low by the hosel.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • The table gives the standard setting of each head. PING lists ±1.5° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.