FAIRWAY WOOD MODEL REFERENCE
PING G410 SFT (2019 US page)
G410 SFT fairway wood from PING’s archived US product page: 3 heads from 16.0° to 22.0°, 42–43 in standard length.
Published loft options16.0, 19.0, 22.0°
Published heads3-wood, 5-wood, 7-wood
Published length range42–43 in

Documented specifications & build options
Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").
| Field | Documented value |
|---|---|
| Published loft options | 16.0, 19.0, 22.0 ° |
| Published heads | 3-wood, 5-wood, 7-wood |
| Published length range | 42–43 in |
| Published lie range | 56.5–57.5 ° |
| Published head volume | 167–188 cc |
| Listed shaft options | PING Alta CB 65 Red; PING Tour 65; PING Tour 75; Project X EvenFlow Black 85; Mitsubishi Tensei CK Orange 70 |
Source: PING G410 SFT fairway wood US product page, Internet Archive capture of 2019-08-22. Reviewed 2026-10-09.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 3-wood · 16.0° ↗ | Loft: 16.0 ° Loft adjustability: ±1.5° Length: 43 in Lie: 56.5 ° Head volume: 188 cc Swing weight: D0 |
| 5-wood · 19.0° ↗ | Loft: 19.0 ° Loft adjustability: ±1.5° Length: 42.5 in Lie: 57.0 ° Head volume: 177 cc Swing weight: D0 |
| 7-wood · 22.0° ↗ | Loft: 22.0 ° Loft adjustability: ±1.5° Length: 42 in Lie: 57.5 ° Head volume: 167 cc Swing weight: D0 |
Identifying the right model
- The black sole shows PING, a red G410 badge and SFT lettering beside the weight port at the back of the sole.
- Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.
What to check before using the reference
- PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-22.
- The table gives the standard setting of each head. PING lists ±1.5° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



