FAIRWAY WOOD MODEL REFERENCE

PING G410 LST (2019 US page)

G410 LST fairway wood from PING’s archived US product page: one 14.5° head, 43 in standard length.

Published loft options14.5°
Published heads3-wood
Published length43 in
PING G410 LST (2019 US page)
Model image · PING G410 LST. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G410 LST · manufacturer specifications
FieldDocumented value
Published loft options14.5 °
Published heads3-wood
Published length43 in
Published lie56.5 °
Published head volume159 cc
Listed shaft optionsPING Alta CB 65 Red; PING Tour 65; PING Tour 75; Project X EvenFlow Black 85; Mitsubishi Tensei CK Orange 70

Source: PING G410 LST fairway wood US product page, Internet Archive capture of 2019-08-19. Reviewed 2026-10-09.

Specifications by configuration

PING G410 LST · documented configurations
ConfigurationPublished values
3-wood · 14.5° ↗
Loft: 14.5 °
Loft adjustability: ±1.5°
Length: 43 in
Lie: 56.5 °
Head volume: 159 cc
Swing weight: D2

Identifying the right model

  • The black sole shows PING, a red G410 badge and a red-trimmed weight port; match the LST name, because the standard G410 fairway sole looks similar.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-19.
  • The table gives the standard setting of each head. PING lists ±1.5° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.