FAIRWAY WOOD MODEL REFERENCE

PING G Le3 (2026 US page)

G Le3 fairway wood from PING’s current US product page: 4 heads from 18.0° to 28.0°, 41–42.5 in standard length.

Published loft options18.0, 21.0, 24.0, 28.0°
Published heads3-wood, 5-wood, 7-wood, 9-wood
Published length range41–42.5 in
PING G Le3 (2026 US page)
Model image · PING G Le3. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G Le3 · manufacturer specifications
FieldDocumented value
Published loft options18.0, 21.0, 24.0, 28.0 °
Published heads3-wood, 5-wood, 7-wood, 9-wood
Published length range41–42.5 in
Published lie range57.0–58.5 °
Published head volume146–174 cc
Listed shaft optionsPING ULT 250 F

Source: PING G Le3 fairway wood US product page. Reviewed 2026-10-09.

Specifications by configuration

PING G Le3 · documented configurations
ConfigurationPublished values
3-wood · 18.0° ↗
Loft: 18.0 °
Loft adjustability: ±1.5°
Length: 42.5 in
Lie: 57.0 °
Head weight: 198.5 g
Head volume: 174 cc
Swing weight: C1
5-wood · 21.0° ↗
Loft: 21.0 °
Loft adjustability: ±1.5°
Length: 42 in
Lie: 57.5 °
Head weight: 202.5 g
Head volume: 166 cc
Swing weight: C1
7-wood · 24.0° ↗
Loft: 24.0 °
Loft adjustability: ±1.5°
Length: 41.5 in
Lie: 58.0 °
Head weight: 206.5 g
Head volume: 157 cc
Swing weight: C1
9-wood · 28.0° ↗
Loft: 28.0 °
Loft adjustability: ±1.5°
Length: 41 in
Lie: 58.5 °
Head weight: 210.5 g
Head volume: 146 cc
Swing weight: C1

Identifying the right model

  • A silver-champagne sole panel carries a lowercase ping wordmark, with navy trim and a G Le3 badge near the toe.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • The table gives the standard setting of each head. PING lists ±1.5° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.