FAIRWAY WOOD MODEL REFERENCE

PING G Le (2019 US page)

G Le fairway wood from PING’s archived US product page: 4 heads from 19.0° to 30.0°, 41–42.5 in standard length.

Published loft options19.0, 22.0, 26.0, 30.0°
Published heads3-wood, 5-wood, 7-wood, 9-wood
Published length range41–42.5 in
PING G Le (2019 US page)
Model image · PING G Le. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G Le · manufacturer specifications
FieldDocumented value
Published loft options19.0, 22.0, 26.0, 30.0 °
Published heads3-wood, 5-wood, 7-wood, 9-wood
Published length range41–42.5 in
Published lie range56.0–57.5 °
Published head volume147–173 cc
Listed shaft optionsPING ULT 230 F

Source: PING G Le fairway wood US product page, Internet Archive capture of 2019-08-18. Reviewed 2026-10-09.

Specifications by configuration

PING G Le · documented configurations
ConfigurationPublished values
3-wood · 19.0° ↗
Loft: 19.0 °
Length: 42.5 in
Lie: 56.0 °
Head volume: 173 cc
Swing weight: C3
5-wood · 22.0° ↗
Loft: 22.0 °
Length: 42 in
Lie: 56.5 °
Head volume: 164 cc
Swing weight: C3
7-wood · 26.0° ↗
Loft: 26.0 °
Length: 41.5 in
Lie: 57.0 °
Head volume: 156 cc
Swing weight: C3
9-wood · 30.0° ↗
Loft: 30.0 °
Length: 41 in
Lie: 57.5 °
Head volume: 147 cc
Swing weight: C3

Identifying the right model

  • A lowercase ping wordmark runs across a silver sole with teal trim and a G Le badge on a dotted panel.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-18.
  • PING’s table lists 0° of loft adjustability for these heads.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.