FAIRWAY WOOD MODEL REFERENCE

PING G (2019 US page)

G fairway wood from PING’s archived US product page: 3 heads from 14.5° to 20.5°, 42–43 in standard length.

Published loft options14.5, 17.5, 20.5°
Published heads3-wood, 5-wood, 7-wood
Published length range42–43 in
PING G (2019 US page)
Model image · PING G. Image source ↗

Documented specifications & build options

Standard head specifications from PING’s US table at the standard hosel setting and stock length, with fractional inches converted exactly (45 3/4" = 45.75").

PING G · manufacturer specifications
FieldDocumented value
Published loft options14.5, 17.5, 20.5 °
Published heads3-wood, 5-wood, 7-wood
Published length range42–43 in
Published lie range56.0–57.0 °
Published head volume152–169 cc
Listed shaft optionsPING Alta 65; PING Tour 65; PING Tour 80; PING TFC 80 F

Source: PING G fairway wood US product page, Internet Archive capture of 2019-08-18. Reviewed 2026-10-09.

Specifications by configuration

PING G · documented configurations
ConfigurationPublished values
3-wood · 14.5° ↗
Loft: 14.5 °
Loft adjustability: ±1°
Length: 43 in
Lie: 56.0 °
Head volume: 169 cc
Swing weight: D1
5-wood · 17.5° ↗
Loft: 17.5 °
Loft adjustability: ±1°
Length: 42.5 in
Lie: 56.5 °
Head volume: 161 cc
Swing weight: D1
7-wood · 20.5° ↗
Loft: 20.5 °
Loft adjustability: ±1°
Length: 42 in
Lie: 57.0 °
Head volume: 152 cc
Swing weight: D1

Identifying the right model

  • A grey sole with blue accents carries a large PING wordmark and a blue G badge toward the toe.
  • Match the full model name and any suffix (MAX, LST, SFT, HL, Stretch) on the head as well as the printed loft.

What to check before using the reference

  • PING’s live US site no longer lists this model; the figures come from an Internet Archive capture of PING’s US page dated 2019-08-18.
  • The table gives the standard setting of each head. PING lists ±1° of loft adjustability, so the hosel setting on a used club can change its loft and lie from these values.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.