IRON SET MODEL REFERENCE
Cobra KING TEC utility irons (2026 US page)
KING TEC utility irons from Cobra’s US product page: 4 heads from 17.0° to 25.0°, 38.25–39.75 in steel and 38.5–40 in graphite standard lengths.
- Published loft options
- 17.0, 19.0, 22.0, 25.0°
- Published heads
- 2U, 3U, 4U, 5U
- Published lie range
- 59.75–61.25°
Documented specifications & build options
Individually sold utility iron heads, not a set; the table gives separate graphite (MCA MMT Hybrid 80) and steel (KBS $-Taper Lite) standard lengths in inches.
| Field | Documented value |
|---|---|
| Published loft options | 17.0, 19.0, 22.0, 25.0 ° |
| Published heads | 2U, 3U, 4U, 5U |
| Published lie range | 59.75–61.25 ° |
| Published steel length range | 38.25–39.75 in |
| Published graphite length range | 38.5–40 in |
Source: Cobra KING TEC Utility Irons US product page. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 2U ↗ | Loft: 17.0 ° Lie: 59.75 ° Offset: 3.2 mm Length: 39.75 in Graphite length: 40 in Steel swing weight: D2 Graphite swing weight: D1 Steel shaft flexes: S, *R Custom Only Graphite shaft flexes: *S & R Custom Only Availability: *RH Custom Only |
| 3U ↗ | Loft: 19.0 ° Lie: 60.25 ° Offset: 3.2 mm Length: 39.25 in Graphite length: 39.5 in Steel swing weight: D2 Graphite swing weight: D1 Steel shaft flexes: S, R Graphite shaft flexes: S, R Availability: RH/*LH Custom Only |
| 4U ↗ | Loft: 22.0 ° Lie: 60.75 ° Offset: 3.3 mm Length: 38.75 in Graphite length: 39 in Steel swing weight: D2 Graphite swing weight: D1 Steel shaft flexes: S, R Graphite shaft flexes: S, R Availability: RH/*LH Custom Only |
| 5U ↗ | Loft: 25.0 ° Lie: 61.25 ° Offset: 3.3 mm Length: 38.25 in Graphite length: 38.5 in Steel swing weight: D2 Graphite swing weight: D1 Steel shaft flexes: *S & R Custom Only Graphite shaft flexes: *S & R Custom Only Availability: *RH/LH Custom Only |
Identifying the right model
- A brushed-steel back with cobra lettering across the upper back, KING TEC UTILITY lettering low on the toe side, a single round weight port on the toe edge, the club number on the toe end of the top line and FORGED lettering on the hosel.
What to check before using the reference
- Cobra’s asterisks mark custom-only builds: the 2U (right-hand only) in every build, its graphite S and R and steel R shafts, the left-hand 3U and 4U, and the 5U in both hands and all flexes; the 5U row also says it is not available in Australia.
- Cobra’s product address names this the 2023 version (king-tec-utility-irons-2023); the page itself states no model year. The 2025 KING TEC iron set is a separate record.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring iron sets
CobraIron set
KING TEC irons · 2025
The 2025 KING TEC chart lists a 29.5° 7-iron and 44° pitching wedge.
29.5° 7-iron loftFull iron chart
CobraIron set
KING TEC X irons · 2025
KING TEC X uses a 27° 7-iron and a different lie sequence from KING TEC.
27° 7-iron loftFull iron chart
CobraIron set
3DP MB irons · 2026 US page
3DP MB from Cobra’s current US product page, with a 34° 7-iron and 46° pitching wedge.
34° 7-iron loftFull iron chart
CobraIron set
3DP Tour irons · 2026 US page
3DP Tour from Cobra’s current US product page, with a 31° 7-iron and 45° pitching wedge.
31° 7-iron loftFull iron chart