DRIVER MODEL REFERENCE

Callaway Rogue ST Max (2024 US page)

Rogue ST Max driver from Callaway’s archived US product page: 3 heads from 9.0° to 12.0°, 45.75 in standard length.

Published loft options9.0, 10.5, 12.0°
Published length45.75 in
Published lie60.0°
Callaway Rogue ST Max (2024 US page)
Model image · Callaway Rogue ST Max. Image source ↗

Documented specifications & build options

Standard head specifications from Callaway’s US specification table. Values describe the stock build and standard hosel setting; custom lengths, shafts and settings differ.

Callaway Rogue ST Max · manufacturer specifications
FieldDocumented value
Published loft options9.0, 10.5, 12.0 °
Published length45.75 in
Published lie60.0 °
Published head volume460 cc

Source: Callaway Rogue ST Max driver US product page, Internet Archive capture of 2024-07-17. Reviewed 2026-10-09.

Specifications by configuration

Callaway Rogue ST Max · documented configurations
ConfigurationPublished values
9.0° head ↗
Loft: 9.0 °
Adjustable loft range: 8.0–11.0°
Lie: 60.0 °
Length: 45.75 in
Head volume: 460 cc
Swing weight by stock shaft: D3 (40/50g)
Handedness: RH / LH
10.5° head ↗
Loft: 10.5 °
Adjustable loft range: 9.5–12.5°
Lie: 60.0 °
Length: 45.75 in
Head volume: 460 cc
Swing weight by stock shaft: D3 (40/50g)
Handedness: RH / LH
12.0° head ↗
Loft: 12.0 °
Adjustable loft range: 11.0–14.0°
Lie: 60.0 °
Length: 45.75 in
Head volume: 460 cc
Swing weight by stock shaft: D3 (40/50g)
Handedness: RH / LH

Identifying the right model

  • ROGUE ST lettering, a gold weight at the back edge and MAX toward the back of a black and grey sole.
  • Match the full model name and any suffix (LS, MAX, X, D, ONE Length, SELECT) on the head as well as the printed loft.

What to check before using the reference

  • The figures come from an Internet Archive capture of Callaway’s US product page dated 2024-07-17.
  • Lofts are the standard setting; Callaway lists the adjustable range beside each head, so the hosel setting on a used club may differ.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.