Home/Club database/Drivers/Elyte Triple Diamond
DRIVER MODEL REFERENCE

Callaway Elyte Triple Diamond (2026 US page)

Elyte Triple Diamond driver from Callaway’s archived US product page: 3 heads from 8.0° to 10.5°, 45.75 in standard length.

Published loft options8.0, 9.0, 10.5°
Published length45.75 in
Published lie57.0°
Callaway Elyte Triple Diamond (2026 US page)
Model image · Callaway Elyte Triple Diamond. Image source ↗

Documented specifications & build options

Standard head specifications from Callaway’s US specification table. Values describe the stock build and standard hosel setting; custom lengths, shafts and settings differ.

Callaway Elyte Triple Diamond · manufacturer specifications
FieldDocumented value
Published loft options8.0, 9.0, 10.5 °
Published length45.75 in
Published lie57.0 °
Published head volume450 cc

Source: Callaway Elyte Triple Diamond driver US product page, Internet Archive capture of 2026-06-15. Reviewed 2026-10-09.

Specifications by configuration

Callaway Elyte Triple Diamond · documented configurations
ConfigurationPublished values
8.0° head ↗
Loft: 8.0 °
Lie: 57.0 °
Length: 45.75 in
Head volume: 450 cc
Availability: RH Only
9.0° head ↗
Loft: 9.0 °
Lie: 57.0 °
Length: 45.75 in
Head volume: 450 cc
Handedness: RH / LH
10.5° head ↗
Loft: 10.5 °
Lie: 57.0 °
Length: 45.75 in
Head volume: 450 cc
Handedness: RH / LH

Identifying the right model

  • ELYTE lettering followed by three small diamonds, a large E graphic and a green accent strip on the sole.
  • Match the full model name and any suffix (LS, MAX, X, D, ONE Length, SELECT) on the head as well as the printed loft.

What to check before using the reference

  • The figures come from an Internet Archive capture of Callaway’s US product page dated 2026-06-15.
  • Callaway marks these lofts as adjustable; the values are the standard setting, so the hosel setting on a used club may differ.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.