Home/Club database/Drivers/Hot Launch X525
DRIVER MODEL REFERENCE

Tour Edge Hot Launch X525 (2026 US page)

Hot Launch X525 driver from Tour Edge’s US certified pre-owned listing: 3 heads from 10.5° to 15°, 44.5 in.

Published loft options
10.5, 12, 15°
Published lie
62°
Published length
44.5 in
Tour Edge Hot Launch X525 (2026 US page)
Model image · Tour Edge Hot Launch X525. Image source ↗

Documented specifications & build options

Standard head specifications from the table on Tour Edge’s certified pre-owned listing, lengths in inches. The three heads are listed with a 1° closed face and a 62° lie.

Tour Edge Hot Launch X525 · manufacturer specifications
FieldDocumented value
Published loft options10.5, 12, 15 °
Published lie62 °
Published length44.5 in
Published head volume460 cc
Listed shaft optionsUST Mamiya Helium Black

Source: Tour Edge Hot Launch X525 certified pre-owned listing specifications (touredge.com). Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Hot Launch X525 · documented configurations
ConfigurationPublished values
10.5° head ↗
Loft: 10.5 °
Lie: 62 °
Length: 44.5 in
Head volume: 460 cc
Face angle: 1° closed
Handedness: RH/LH
12° head ↗
Loft: 12 °
Lie: 62 °
Length: 44.5 in
Head volume: 460 cc
Face angle: 1° closed
Handedness: RH
HL (15°) head ↗
Loft: 15 °
Lie: 62 °
Length: 44.5 in
Head volume: 460 cc
Face angle: 1° closed
Handedness: RH

Identifying the right model

  • A black sole with Tour Edge HOT LAUNCH on a dark panel at the crown edge, an orange MAX MOI block with a screw and ANTI-SLICE lettering at the toe, orange stripes, X525 on a carbon-pattern panel in the centre and the loft 10.5 printed by the hosel.

What to check before using the reference

  • The listing’s footnote makes the 10.5° head the only left-hand loft; the third head is labelled HL (15°).
  • Tour Edge’s certified pre-owned Hot Launch X525 Women’s Driver listing publishes the same three heads, 1° closed face, 460 cc and 62° lie at 43.5 in (1 in shorter) with a UST Mamiya Helium White shaft and the same left-hand footnote; it is a women’s stock build of this head, not a separate model.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.