DRIVER MODEL REFERENCE
Tour Edge Exotics C725 (2026 US page)
Exotics C725 driver from Tour Edge’s US product page: 2 adjustable heads (9°, 10.5° standard), 45.5 in.
- Published loft options
- 9, 10.5°
- Published lie
- 58°
- Published length
- 45.5 in

Documented specifications & build options
Standard hosel setting (O/STD) of each head from Tour Edge’s US specification table with the stock length in inches; the other seven hosel settings are listed per head.
| Field | Documented value |
|---|---|
| Published loft options | 9, 10.5 ° |
| Published lie | 58 ° |
| Published length | 45.5 in |
| Published adjustable loft range | 7–12.5 ° |
| Published adjustable lie range | 58–61 ° |
| Listed shaft options | Project X Denali Blue 60; Project X HZRDUS Gen 5 Black 60 |
Source: Tour Edge Exotics C725 US product page specifications. Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 9° head ↗ | Loft: 9 ° Lie: 58 ° Length: 45.5 in Published adjustable loft range: 7–11 ° Published adjustable lie range: 58–61 ° Hosel settings (loft/lie): O− 8°/58.5°; −− 7°/59°; U− 8°/60° draw; UO 9°/61° draw; U+ 10°/60.5° draw; ++ 11°/59.5°; O+ 10°/58.5° Handedness: RH |
| 10.5° head ↗ | Loft: 10.5 ° Lie: 58 ° Length: 45.5 in Published adjustable loft range: 8.5–12.5 ° Published adjustable lie range: 58–61 ° Hosel settings (loft/lie): O− 9.5°/58.5°; −− 8.5°/59°; U− 9.5°/60° draw; UO 10.5°/61° draw; U+ 11.5°/60.5° draw; ++ 12.5°/59.5°; O+ 11.5°/58.5° Handedness: RH |
Identifying the right model
- A matte black sole with Tour Edge EXOTICS beside a sliding front weight track, FLIGHT TUNING SYSTEM near the crown edge, C725 low toward the heel above the printed loft 9, DRAW at the toe and a rear weight port by the hosel.
What to check before using the reference
- Tour Edge’s footnote lists the C725 driver as right-hand only with 5 g rear and 15 g front stock sole weights; 8–28 g weights are sold separately.
- The C725 and Exotics LS driver tables give the same two heads, settings and 45.5 in length; the heads are different models.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



