Home/Club database/Drivers/Hot Launch E525
DRIVER MODEL REFERENCE

Tour Edge Hot Launch E525 (2026 US page)

Hot Launch E525 driver from Tour Edge’s US certified pre-owned listing: 3 heads from 9° to 12°, 45 in.

Published loft options
9, 10.5, 12°
Published lie
60°
Published length
45 in
Tour Edge Hot Launch E525 (2026 US page)
Model image · Tour Edge Hot Launch E525. Image source ↗

Documented specifications & build options

Standard head specifications from the table on Tour Edge’s certified pre-owned listing, lengths in inches.

Tour Edge Hot Launch E525 · manufacturer specifications
FieldDocumented value
Published loft options9, 10.5, 12 °
Published lie60 °
Published length45 in
Published head volume460 cc
Listed shaft optionsUST Mamiya Helium Black

Source: Tour Edge Hot Launch E525 certified pre-owned listing specifications (touredge.com). Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Hot Launch E525 · documented configurations
ConfigurationPublished values
9° head ↗
Loft: 9 °
Lie: 60 °
Length: 45 in
Head volume: 460 cc
Face angle: Square
Handedness: RH
10.5° head ↗
Loft: 10.5 °
Lie: 60 °
Length: 45 in
Head volume: 460 cc
Face angle: Square
Handedness: RH
12° head ↗
Loft: 12 °
Lie: 60 °
Length: 45 in
Head volume: 460 cc
Face angle: Square
Handedness: RH

Identifying the right model

  • A black sole with Tour Edge HOT LAUNCH on a dark panel at the crown edge, orange stripes, an orange MAX MOI weight block with a screw at the toe end, E525 on a carbon-pattern panel in the centre and the loft 9 printed by the hosel.

What to check before using the reference

  • The listing’s footnote says right hand; the X525 driver is the offset-hosel sibling with a 62° lie and 44.5 in length.
  • Tour Edge’s certified pre-owned Hot Launch E525 Women’s Driver listing publishes the same three lofts, square face, 460 cc and 60° lie at 44 in (1 in shorter) with a UST Mamiya Helium White shaft; it is a women’s stock build of this head, not a separate model.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.