HYBRID MODEL REFERENCE

Tour Edge Exotics Max (2026 US page)

Exotics Max hybrid from Tour Edge’s US product page: 4 heads from 17° to 25°, 39.5–41 in.

Published loft options
17, 19, 22, 25°
Published heads
#2, #3, #4, #5
Published lie range
58–59.5°
Tour Edge Exotics Max (2026 US page)
Model image · Tour Edge Exotics Max. Image source ↗

Documented specifications & build options

Standard head specifications from Tour Edge’s US table, lengths in inches.

Tour Edge Exotics Max · manufacturer specifications
FieldDocumented value
Published loft options17, 19, 22, 25 °
Published heads#2, #3, #4, #5
Published lie range58–59.5 °
Published length range39.5–41 in
Published head volume115 cc, 113 cc, 110 cc, 108 cc
Listed shaft optionsFujikura Ventus White/Black; Fujikura Ventus Red/Black; Fujikura Ventus Blue/Black

Source: Tour Edge Exotics Max US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics Max · documented configurations
ConfigurationPublished values
#2 · 17° ↗
Loft: 17 °
Lie: 58 °
Length: 41 in
Head volume: 115 cc
Face angle: Square
Handedness: RH
#3 · 19° ↗
Loft: 19 °
Lie: 58.5 °
Length: 40.5 in
Head volume: 113 cc
Face angle: Square
Handedness: RH/LH
#4 · 22° ↗
Loft: 22 °
Lie: 59 °
Length: 40 in
Head volume: 110 cc
Face angle: Square
Handedness: RH
#5 · 25° ↗
Loft: 25 °
Lie: 59.5 °
Length: 39.5 in
Head volume: 108 cc
Face angle: Square
Handedness: RH

Identifying the right model

  • A compact dark sole lettered EXOTICS MAX beneath a dimpled TE monogram panel, TUNGSTEN along the toe edge, a dimpled triangle with TOUR EDGE at the lower toe and the loft printed 3 19 by the hosel.

What to check before using the reference

  • Tour Edge’s table heading makes the 19° #3 the only left-hand head.
  • The #3, #4 and #5 figures repeat the Exotics E725 hybrid table; the Max adds a 17° #2 and is a different head.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.