HYBRID MODEL REFERENCE

Tour Edge Exotics E725 (2026 US page)

Exotics E725 hybrid from Tour Edge’s US product page: 3 heads from 19° to 25°, 39.5–40.5 in.

Published loft options
19, 22, 25°
Published heads
#3, #4, #5
Published lie range
58.5–59.5°
Tour Edge Exotics E725 (2026 US page)
Model image · Tour Edge Exotics E725. Image source ↗

Documented specifications & build options

Standard head specifications from Tour Edge’s US table, lengths in inches.

Tour Edge Exotics E725 · manufacturer specifications
FieldDocumented value
Published loft options19, 22, 25 °
Published heads#3, #4, #5
Published lie range58.5–59.5 °
Published length range39.5–40.5 in
Published head volume113 cc, 110 cc, 108 cc
Listed shaft optionsProject X Cypher 2.0; Project X Denali Blue 60

Source: Tour Edge Exotics E725 US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics E725 · documented configurations
ConfigurationPublished values
#3 · 19° ↗
Loft: 19 °
Lie: 58.5 °
Length: 40.5 in
Head volume: 113 cc
Face angle: Square
Handedness: RH/LH
#4 · 22° ↗
Loft: 22 °
Lie: 59 °
Length: 40 in
Head volume: 110 cc
Face angle: Square
Handedness: RH
#5 · 25° ↗
Loft: 25 °
Lie: 59.5 °
Length: 39.5 in
Head volume: 108 cc
Face angle: Square
Handedness: RH

Identifying the right model

  • A compact black sole with MAXIMUM FORGIVENESS at the crown edge, Tour Edge EXOTICS beside a small toe-side weight screw, E725 low toward the heel and the loft printed as 3 19 beside the hosel.

What to check before using the reference

  • Tour Edge’s footnote makes the 19° #3 the only left-hand head and names a 10 g stock rear sole weight; 5–28 g weights are sold separately.
  • The Exotics Max hybrid table lists the same #3, #4 and #5 figures and adds a 17° #2; the heads are different models.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.