FAIRWAY WOOD MODEL REFERENCE

Tour Edge Exotics Max (2026 US page)

Exotics Max fairway from Tour Edge’s US product page: 5 heads from 15° to 24°, 41.25–43 in.

Published loft options
15, 16.5, 18, 21, 24°
Published heads
#3, #3, #5, #7, #9
Published lie range
57–59.5°
Tour Edge Exotics Max (2026 US page)
Model image · Tour Edge Exotics Max. Image source ↗

Documented specifications & build options

Standard head specifications from Tour Edge’s US table, lengths in inches.

Tour Edge Exotics Max · manufacturer specifications
FieldDocumented value
Published loft options15, 16.5, 18, 21, 24 °
Published heads#3, #3, #5, #7, #9
Published lie range57–59.5 °
Published length range41.25–43 in
Published head volume168 cc, 166 cc, 165 cc, 164 cc, 164 cc
Listed shaft optionsFujikura Ventus White/Black; Fujikura Ventus Red/Black; Fujikura Ventus Blue/Black

Source: Tour Edge Exotics Max US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics Max · documented configurations
ConfigurationPublished values
#3 · 15° ↗
Loft: 15 °
Lie: 57 °
Length: 43 in
Head volume: 168 cc
Face angle: Square
Handedness: RH/LH
#3 · 16.5° ↗
Loft: 16.5 °
Lie: 58 °
Length: 43 in
Head volume: 166 cc
Face angle: Square
Handedness: RH
#5 · 18° ↗
Loft: 18 °
Lie: 58 °
Length: 42 in
Head volume: 165 cc
Face angle: Square
Handedness: RH
#7 · 21° ↗
Loft: 21 °
Lie: 59 °
Length: 41.5 in
Head volume: 164 cc
Face angle: Square
Handedness: RH
#9 · 24° ↗
Loft: 24 °
Lie: 59.5 °
Length: 41.25 in
Head volume: 164 cc
Face angle: Square
Handedness: RH

Identifying the right model

  • A dark sole with EXOTICS MAX in the centre under a TE monogram, TUNGSTEN at the toe edge, a dimpled triangular panel at the lower toe with TOUR EDGE beneath it and the loft printed 3 15 beside the hosel.

What to check before using the reference

  • Tour Edge’s table heading makes the 15° #3 the only left-hand head.
  • The four lower-lofted heads repeat the Exotics E725 fairway figures; the Max adds a 24° #9 and is a different head.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.