FAIRWAY WOOD MODEL REFERENCE

Tour Edge Exotics E725 (2026 US page)

Exotics E725 fairway from Tour Edge’s US product page: 4 heads from 15° to 21°, 41.5–43 in.

Published loft options
15, 16.5, 18, 21°
Published heads
#3, #3, #5, #7
Published lie range
57–59°
Tour Edge Exotics E725 (2026 US page)
Model image · Tour Edge Exotics E725. Image source ↗

Documented specifications & build options

Standard head specifications from Tour Edge’s US table, lengths in inches.

Tour Edge Exotics E725 · manufacturer specifications
FieldDocumented value
Published loft options15, 16.5, 18, 21 °
Published heads#3, #3, #5, #7
Published lie range57–59 °
Published length range41.5–43 in
Published head volume168 cc, 166 cc, 165 cc, 164 cc
Listed shaft optionsProject X Cypher 2.0 40/50; Project X Denali Blue 60

Source: Tour Edge Exotics E725 US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics E725 · documented configurations
ConfigurationPublished values
#3 · 15° ↗
Loft: 15 °
Lie: 57 °
Length: 43 in
Head volume: 168 cc
Face angle: Square
Handedness: RH/LH
#3 · 16.5° ↗
Loft: 16.5 °
Lie: 58 °
Length: 43 in
Head volume: 166 cc
Face angle: Square
Handedness: RH
#5 · 18° ↗
Loft: 18 °
Lie: 58 °
Length: 42 in
Head volume: 165 cc
Face angle: Square
Handedness: RH
#7 · 21° ↗
Loft: 21 °
Lie: 59 °
Length: 41.5 in
Head volume: 164 cc
Face angle: Square
Handedness: RH

Identifying the right model

  • A black sole with MAXIMUM FORGIVENESS at the crown edge, Tour Edge EXOTICS across the centre beside a small toe-side weight screw, E725 low toward the heel and the loft printed as 3 15 beside the hosel.

What to check before using the reference

  • Tour Edge’s footnote makes the 15° #3 the only left-hand head and names a 10 g stock rear sole weight; 5–28 g weights are sold separately.
  • The Exotics Max fairway table repeats these four heads and adds a 24° #9; the heads are different models.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.