DRIVER MODEL REFERENCE

Tour Edge Exotics LS (2026 US page)

Exotics LS driver from Tour Edge’s US product page: 2 adjustable heads (9°, 10.5° standard), 45.5 in.

Published loft options
9, 10.5°
Published lie
58°
Published length
45.5 in
Tour Edge Exotics LS (2026 US page)
Model image · Tour Edge Exotics LS. Image source ↗

Documented specifications & build options

Standard hosel setting (O/STD) of each head from Tour Edge’s US specification table with the stock length in inches; the other seven hosel settings are listed per head.

Tour Edge Exotics LS · manufacturer specifications
FieldDocumented value
Published loft options9, 10.5 °
Published lie58 °
Published length45.5 in
Published adjustable loft range7–12.5 °
Published adjustable lie range58–61 °
Listed shaft optionsFujikura Ventus Red/Black; Fujikura Ventus Blue/Black

Source: Tour Edge Exotics LS US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics LS · documented configurations
ConfigurationPublished values
9° head ↗
Loft: 9 °
Lie: 58 °
Length: 45.5 in
Published adjustable loft range: 7–11 °
Published adjustable lie range: 58–61 °
Hosel settings (loft/lie): O− 8°/58.5°; −− 7°/59°; U− 8°/60° draw; UO 9°/61° draw; U+ 10°/60.5° draw; ++ 11°/59.5°; O+ 10°/58.5°
Handedness: RH
10.5° head ↗
Loft: 10.5 °
Lie: 58 °
Length: 45.5 in
Published adjustable loft range: 8.5–12.5 °
Published adjustable lie range: 58–61 °
Hosel settings (loft/lie): O− 9.5°/58.5°; −− 8.5°/59°; U− 9.5°/60° draw; UO 10.5°/61° draw; U+ 11.5°/60.5° draw; ++ 12.5°/59.5°; O+ 11.5°/58.5°
Handedness: RH

Identifying the right model

  • A carbon-weave sole with EXOTICS LS toward the toe, a TE monogram at the crown edge, a recessed TUNGSTEN panel in the centre, FLIGHT TUNING SYSTEM along the toe edge, an oval rear weight port near the hosel, TOUR EDGE low at the toe and the loft 9 by the hosel.

What to check before using the reference

  • Right-hand only per Tour Edge’s table heading.
  • The Exotics C725 driver table gives the same two heads, settings and 45.5 in length; the heads are different models.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.